Advertisement
Repair and maintenance

Wifi Keeps Disconnecting: How Do You Make It Stable Again?

Does your Wi-Fi drop on one device or all over the house? An Ethernet cable test points the diagnosis, then four solutions run from the router to the Windows 11 Wi-Fi adapter.

6 min read

Internet router sending a broken Wi-Fi signal, with a circular restart arrow
Table of contents
  1. Common symptoms and causes
  2. Before you start
  3. Solution 1: restart the router and place it properly
  4. Solution 2: forget the network and update the device
  5. Solution 3: change the Wi-Fi band or channel
  6. Solution 4: adjust the Wi-Fi adapter on Windows 11
  7. If nothing works
  8. Upgrade your Wi-Fi network: our selection of equipment
  9. Frequently asked questions
    1. Why does my Wi-Fi keep disconnecting?
    2. How can I tell whether the router or the device is the problem?
    3. Should I split the 2.4 GHz and 5 GHz networks?
    4. Why does my Wi-Fi keep disconnecting on Windows 11 only?

This article contains affiliate links: if you buy through them, Wanda-techs earns a commission at no extra cost to you.

Wifi keeps disconnecting, on one device or all over the house? If every device drops, look at the router: placement, interference, channel. If only one drops, look at its settings and its driver.

Advertisement

An Ethernet cable test tells you which side to check.

Common symptoms and causes

  • Drops on a single device: Wi-Fi adapter driver, the adapter’s power saving on Windows, device settings, a VPN or third-party security software, the “Connectivity Assist” option on iPhone.
  • Drops on every device: router that needs a restart, outdated firmware (the router’s internal software), poor placement, interference from a microwave, halogen lamps or a TV, a crowded channel in an apartment building, not enough range.
  • Wi-Fi drops but the Ethernet connection is stable: the Wi-Fi is the problem.
  • Internet keeps dropping, Ethernet included: the line, the router or your internet provider.
  • Drops on a single band (2.4 GHz or 5 GHz): the other band may hold up better.

Before you start

  1. Turn off the PC’s Wi-Fi and plug it into the router with the Ethernet cable supplied. If the connection becomes stable, the Wi-Fi is the problem.
  2. Connect another device to the same Wi-Fi network. If it holds, the problem comes from the first device; if no device connects, check the router and your provider.
  3. Look at the device’s signal indicator. If it is weak, move closer to the router and test again.

Good to know: do your devices stay connected to Wi-Fi but have no internet, or does none of them have access? The outage most likely comes from your provider. Our Wi-Fi connected but no internet checklist covers that case.

Requirements: access to your router’s interface or your provider’s app, an administrator account on Windows for the commands, and the Wi-Fi password.

Warning: a network reset (Windows or iPhone) erases data, so back up first. It removes saved Wi-Fi networks, their passwords and VPN settings, which you will have to set up again.

Warning: opening the device may void the warranty; check the warranty end date first. Never open the router, and stay within your provider’s official menus.

Solution 1: restart the router and place it properly

Is your router also your modem (Livebox, Freebox…)? Follow only the steps for the single device.

Advertisement
  1. Unplug the router, then the modem. If lights stay on, remove the backup battery.
  2. Wait at least 30 seconds.
  3. Plug the modem back in and wait until the lights stop blinking.
  4. Plug the router back in and wait until its lights are steady, which takes a few minutes.
  5. Place the router up high, in an open area, not inside a cabinet or closet.
  6. Keep it away from the microwave, halogen lamps and the TV.

The router’s lights should be steady. Free also recommends this restart so the Freebox Server updates itself, and Apple recommends checking that the router’s firmware is up to date.

wifi-se-deconnecte-tout-le-temps-1-1024x576 Wifi Keeps Disconnecting: How Do You Make It Stable Again?
Unplug the router, wait at least 30 seconds, then plug it back in.

Solution 2: forget the network and update the device

Forgetting the network removes its password from the device. Keep the password handy.

Warning: if iCloud Keychain is on, forgetting a network also forgets it on the other devices signed in to the same Apple account. To avoid that, turn off auto-join for this network instead: the password stays saved.

On a Windows 11 PC:

  1. Open Settings > Network & internet > Wi-Fi > Manage known networks.
  2. Select your network and click Forget.
  3. Reconnect to the network with its password.
  4. Install the updates offered by Windows Update, then restart the PC.

On an iPhone or iPad:

  1. Open Settings > Wi-Fi and check that Wi-Fi is on and Airplane Mode is off.
  2. Turn off the “Connectivity Assist” option in Settings > Wi-Fi.
  3. Tap Edit, then ⓘ next to the network.
  4. Tap Forget This Network, then Forget.
  5. Join the network again with its password.

On a Mac:

Advertisement
  1. Open Apple menu > System Settings > Wi-Fi > Advanced.
  2. Click More Options (⋯), then Remove From List and Forget.
  3. Join the network again with its password.

The device should reconnect and stay connected. Is a VPN or third-party security software installed? Uninstall it, restart and test again.

For an iPhone that refuses some networks, see our iPhone and Wi-Fi guide.

Solution 3: change the Wi-Fi band or channel

A channel is the exact frequency the router broadcasts on. In an apartment building it can be crowded, and changing it does not change the setup of your Wi-Fi devices.

Try the other band first:

  1. If your router offers both bands, connect your device to the other one (2.4 GHz or 5 GHz). Apple recommends 5 GHz when it is available.

The Livebox and Freebox interfaces are in French, so their labels are given as they appear, with a plain-English gloss in parentheses.

On an Orange Livebox 4, 5, 6, 7 or S, from the Livebox interface:

  1. Click the Réseau local icon (local network), then the Wi-Fi menu.
  2. Choose your network, or the 5GHz tab if the bands are separate.
  3. Click Afficher les paramètres avancés (show advanced settings).
  4. Under Canal radio (radio channel), choose Automatique (automatic).
  5. Click Enregistrer (save).

Only the Automatique setting lets the Livebox optimize its Wi-Fi. In the Orange et moi or MySosh app, the same setting is under Votre Livebox > Carte de vos équipements > Gérer votre wifi > Configurer votre wifi > Paramètres avancés > Canal wifi (your Livebox, map of your equipment, manage your Wi-Fi, configure your Wi-Fi, advanced settings, Wi-Fi channel); confirm and wait for the confirmation.

On a Freebox:

  1. Sign in to your Espace Abonné Freebox (Freebox Subscriber Area) and open Ma Freebox (My Freebox).
  2. Click Paramétrer mon réseau WiFi (set up my Wi-Fi network).
  3. Choose Canal automatique (automatic channel).

Your devices then reconnect without any setting on your side.

Good to know: some devices made in the United States do not support channels 12 and 13. For SFR and Bouygues Telecom routers, follow your provider’s help: we have no verified official page to give you the path.

Solution 4: adjust the Wi-Fi adapter on Windows 11

This solution is for a PC that drops on its own. To go further, see our guide for a PC that keeps disconnecting from Wi-Fi.

First, stop Windows from turning off the adapter to save power:

  1. Open Device Manager > Network adapters.
  2. Select your Wi-Fi adapter and open its Properties.
  3. On the Power Management tab, uncheck “Allow the computer to turn off this device to save power”.
  4. Confirm to save the change.

In the same window, the Driver tab shows the driver’s version and date (the software that makes the adapter work). The Advanced tab has a “Wireless Mode” or “Band” setting to check.

wifi-se-deconnecte-tout-le-temps-2-1024x576 Wifi Keeps Disconnecting: How Do You Make It Stable Again?
On Windows 11, stop the computer from turning off the Wi-Fi adapter to save power.

Still dropping? Reinstall the driver:

  1. First save the Wi-Fi driver from your PC manufacturer’s website, on a USB drive if the PC may stay offline.
  2. In Device Manager > Network adapters, select the Wi-Fi adapter, then Uninstall device.
  3. Check “Attempt to remove the driver for this device”, then click Uninstall.
  4. Open Start > Power > Restart.

Windows reinstalls the driver on restart. The Wi-Fi adapter should reappear and reconnect.

The following commands reset some of Windows’ network settings. Open Command Prompt as administrator and type them in this order:

  1. Type netsh winsock reset and press Enter (resets network settings).
  2. Type netsh int ip reset and press Enter.
  3. Type ipconfig /release and press Enter.
  4. Type ipconfig /renew and press Enter.
  5. Type ipconfig /flushdns and press Enter.
  6. Restart the PC.

As a last resort, the next step erases data. Network reset removes and reinstalls the network adapters; VPNs and Hyper-V switches will need to be set up again. Back up first.

  1. After noting your Wi-Fi passwords and VPN settings, which will be erased, open Settings > Network & internet > Advanced network settings > Network reset.
  2. Click Reset now, then Yes.

After the restart, reconnect to Wi-Fi. Did your home network switch to a public network profile? Set it back to a private one.

If nothing works

First check whether the PC can still reach the router:

  1. In Command Prompt, type ipconfig and note the “Default gateway” address.
  2. Type ping followed by that address.

With 0% loss, the PC reaches the router. With no reply, test over a direct Ethernet connection and check the router’s firmware. An address in 169.254.x.x means the router is not assigning an address to the device (DHCP service).

To test over Ethernet, here is a 5 m Cat 6 Ethernet cable.

wifi-se-deconnecte-tout-le-temps-300x169 Wifi Keeps Disconnecting: How Do You Make It Stable Again?

UGREEN Cat 6 Ethernet cable, 5 m

Connects a PC straight to the router for a stable wired connection. Handy for testing the network or working while Wi-Fi is down.

On an iPhone or iPad, the last resort erases data: Wi-Fi networks and passwords, cellular settings, VPN and APN. Back up first by noting your Wi-Fi passwords and VPN settings. On a work or school device, check with the IT department first.

  1. Open Settings > General > Transfer or Reset [device] > Reset.
  2. Tap Reset Network Settings.

Is Ethernet unstable too, or do all devices still drop after the restart, the automatic channel and the new placement? Contact your internet provider’s support (in France: Orange, Free, SFR or Bouygues Telecom). Have ready your router model, the list of affected devices, the times of the drops and the tests already done (Ethernet, another device).

Upgrade your Wi-Fi network: our selection of equipment

A few pieces of equipment useful to people who set up or expand their home network.

  • TP-Link Deco X20 (pack of 2) Wi-Fi 6 mesh system AX1800Two units that cover a home with a single Wi-Fi network. Useful when one router cannot reach every room.AmazonSee at Amazon
  • TP-Link RE315 AC1200 dual-band Wi-Fi repeaterExtends the Wi-Fi signal into a room the router reaches poorly. Dual-band, it works on 2.4 GHz and 5 GHz.AmazonSee at Amazon
  • TP-Link Archer TX20U, Wi-Fi 6 USB 3.0 adapter AX1800Adds dual-band Wi-Fi 6 to a PC whose built-in card is missing or faulty. It plugs into a USB port and works without opening the computer.AmazonSee at Amazon
  • Belkin 4-outlet surge protector, 525 joules, 2 m, 2 USB portsPower strip with surge protection that shields chargers and devices from voltage spikes. Its two USB ports also free up a socket.AmazonSee at Amazon

Frequently asked questions

Why does my Wi-Fi keep disconnecting?

The cause depends on how many devices are affected. If all of them drop, look at the router: restart, firmware, placement, interference or a crowded channel. If only one drops, look at its settings, its driver or an installed VPN.

How can I tell whether the router or the device is the problem?

Connect another device to the same network. If it stays connected, the problem comes from the first device; if none connects, check the router and your provider. An Ethernet cable test confirms the diagnosis: stable connection over Ethernet means the Wi-Fi is the problem.

Should I split the 2.4 GHz and 5 GHz networks?

The Microsoft and Apple pages we consulted recommend trying the other band when the router offers both; they do not cover splitting the networks. Apple prefers 5 GHz when it is available. On a Livebox, a 5GHz tab appears in the Wi-Fi settings when the bands are separate.

Why does my Wi-Fi keep disconnecting on Windows 11 only?

If other devices hold their connection, the problem comes from the PC. Turn off power saving for the Wi-Fi adapter in Device Manager, then reinstall the driver if the drops continue.

Share this content:

Leave a Reply

Your email address will not be published. Required fields are marked *