This article contains affiliate links: if you buy through them, Wanda-techs earns a commission at no extra cost to you.
To choose a smart thermostat, start from your heating, not the brand. With a gas boiler that supports OpenTherm modulation, our pick is the Netatmo Smart Modulating Thermostat, or the tado° Smart Thermostat V3+ if you want geolocation. For a gas or oil boiler, an air-to-water heat pump or a pellet stove switched simply on and off, go for the Netatmo Smart Thermostat ORIGINAL, which works with Matter through its Thermo Hub gateway.

Our picks at a glance
- Netatmo Smart Modulating Thermostat: our pick for an OpenTherm boiler, with no subscription mentioned by Netatmo.
- Netatmo Smart Thermostat ORIGINAL: for most individual heating systems, and for a home run from Apple Home, Google Home, Alexa or SmartThings.
- tado° Smart Thermostat V3+: for geolocation, as long as you pay for the Auto-Assist subscription.
- tado° Smart Thermostat X: for a new tado° setup, a relay or OpenTherm boiler, underfloor heating or, with the Heat Pump Optimizer X, a hydronic heat pump.
- Netatmo Smart Thermostat: Netatmo’s older model, for a boiler switched on and off.
How to choose a smart thermostat
Your type of heating first
An on/off boiler gets a plain order to fire or stop. An OpenTherm boiler talks to the thermostat through a protocol that lets it modulate its output, and only some thermostats can use it.
The Netatmo Smart Modulating Thermostat works only with an OpenTherm boiler. The older Netatmo Smart Thermostat is not OpenTherm.
Check your boiler in the manufacturer’s compatibility tool before you buy: Netatmo has one on its website. Electric radiators run through a pilot wire (a French control standard) and communal heating are not covered by the product pages we checked. For those, the manufacturer’s tool settles it.
Wired or wireless
The Netatmo Smart Thermostat ORIGINAL can be fitted wired or wireless, and Netatmo says you can install it yourself in under 30 minutes. In wireless mode, a Thermo Link receiver plugged into the boiler, the heat pump or another system passes on the on/off order.
The tado° V3+ comes as a wired kit and as a wireless kit, linked to the boiler by a wired box.
The subscription
Netatmo mentions no subscription for the Smart Modulating Thermostat or for the ORIGINAL range, and heating consumption tracking is free on the Modulating model. With tado°, the V3+ and older thermostats keep several automations for Auto-Assist, a paid plan billed monthly or yearly. The tado° X range uses a different plan, AI Assist.
We could not confirm the price of Auto-Assist on tado°’s store. Read it before you pay.
Matter and voice assistants
Matter is the common smart home standard: a Matter device can be added to Apple Home, Google Home, Alexa or SmartThings. The Netatmo ORIGINAL range supports it natively through the Thermo Hub, a gateway that plugs into a socket. The page of the Netatmo Smart Modulating Thermostat shows only Siri and does not mention Matter.
Good to know: the tado° page we read does not mention Matter for the X range. If it matters to you, check before you buy.
Smart radiator valves for room-by-room control
A smart radiator valve fits on the thermostatic valve of a radiator and sets the temperature room by room. tado°’s Smart Radiator Thermostat X fits almost all common thermostatic valves, with adapters supplied. Before you buy, note the make and the thread size of the valves on your radiators.

Warning: tado° X products do not work with V3+ and older ones, and V3+ heads only work with a V3+ thermostat. Do not mix the two ranges.
Before you start fitting
A wired thermostat connects to the boiler or to a relay. Switch the power off at the consumer unit before any wiring. Unplug the device from the mains before opening it; never work on a device that is plugged in; the capacitors in some devices (TVs, microwaves, power supplies) stay charged after unplugging: do not touch them.
If you have any doubt about your boiler, have a professional do the connection. Opening the device can void the warranty; check the warranty end date first, and read in the boiler’s manual what it allows.
With tado°, without Auto-Assist, heating history is limited to one day. If you stop the subscription, history older than that day can no longer be viewed: save the data you want to keep beforehand.
Netatmo Smart Modulating Thermostat: for an OpenTherm boiler
The Smart Modulating Thermostat is fitted wirelessly, by you, on an OpenTherm boiler. It builds your schedules from five questions, offers an away mode and a frost-protection mode, and preheats according to the weather with Auto-Adapt. It also flags boiler faults and runs a hot water schedule.
It is set up in the Home + Control app and accepts thermostatic valve heads as add-ons. Netatmo mentions no subscription, and heating consumption tracking is free.
Its limits: it refuses any boiler that is not OpenTherm, and hot water can only be controlled with an OpenTherm boiler that has a built-in tank. On voice control, the page shows only Siri, with no mention of Matter.
If your boiler is OpenTherm, this is the model described above.

Netatmo Smart Modulating Thermostat (OTH-PRO), wireless thermostat for OpenTherm boilers
Controls an OpenTherm boiler wirelessly and lets it modulate its output. It is set up in the Home + Control app.
- AmazonSee at Amazon
Netatmo Smart Thermostat ORIGINAL: for most individual heating systems
Netatmo announced the ORIGINAL range on 23 January 2026: the Smart Thermostat ORIGINAL, the Smart Radiator Valve ORIGINAL and the Thermo Hub gateway. The thermostat suits most individual heating systems: gas and oil boilers, air-to-water heat pumps, wood and pellet stoves. It is set up in the Home + Control app, which replaces the Energy app.
It can be fitted wired or wireless, and several thermostats or Thermo Link receivers create separate zones. With the Thermo Hub, it joins Apple Home, Google Home, Alexa and SmartThings through Matter, with no subscription mentioned.
Its limits: the page does not mention OpenTherm. So we cannot say that it modulates a boiler’s output.
If your Netatmo thermostat loses its connection, our guide to reconnecting an offline Netatmo thermostat walks you through it.
Here is the Netatmo Smart Thermostat ORIGINAL, for an individual heating system switched on and off.

Netatmo ORIGINAL smart thermostat for individual heating (wireless or wired kit)
Connected thermostat from the Netatmo Original range, sold as a wireless or wired kit. It is controlled from the app for individual heating.
- AmazonSee at Amazon
tado° Smart Thermostat V3+: for geolocation
The tado° V3+ is sold as a wired or wireless kit and, according to the French consumer magazine Que Choisir, works with OpenTherm boilers. It handles geolocation, meaning it lowers the heating when your phone leaves the house, and several zones. Without a subscription, you keep the Climate Report, Care & Protect, Energy IQ, Air Comfort, the Savings Summary and manual control of the flow temperature.
With Auto-Assist, geolocation becomes automatic, the heating starts before you get home and adjusts when a window is open. The plan also optimises the flow temperature according to the weather and keeps 13 months of history. You buy it in the app, under Settings > Auto-Assist, as the home administrator.
Its limits: the most useful automations go through the paid subscription, and history drops to one day without it. No child lock. Its heads do not work with the X range.
Here is the wireless kit of the tado° V3+, to compare against the cost of the Auto-Assist subscription.

tado° V3+ Wireless Smart Thermostat Starter Kit
Lowers the heating when your phone leaves home and manages several rooms with V3+ compatible heads. Some automations need the Auto-Assist subscription.
- AmazonSee at Amazon
tado° Smart Thermostat X: for a new tado° setup
The Smart Thermostat X controls relay or OpenTherm boilers and underfloor heating. The Heat Pump Optimizer X is aimed at hydronic heat pumps, for which tado° names the brands Panasonic, Daikin, Atlantic, Vaillant, Saunier Duval and Fujitsu. The Smart Radiator Thermostat X completes the set room by room.
Its limits: the X range works with no tado° V3+ or older product, so you cannot extend an existing installation with it. It uses the AI Assist plan instead of Auto-Assist, and our sources detail neither its content nor its price.
Netatmo Smart Thermostat: the older model for an on/off boiler
Do not confuse it with the Modulating model: Netatmo’s Smart Thermostat is not OpenTherm. According to Que Choisir, it works with most boilers, heat pumps and underfloor heating systems, connects directly or through a relay, and accepts up to 10 schedules. Other thermostats or thermostatic heads allow multi-zone control.
Its limits: no geolocation, no child lock. In February 2025, Que Choisir noted reports of excessive battery drain.
Here is the older Netatmo Smart Thermostat, for an on/off boiler.

Netatmo Smart Thermostat for individual boilers (NTH01-FR-EC)
Wireless connected thermostat with a Relay, controlled from a smartphone app. It works with most individual boilers.
- AmazonSee at Amazon
Comparison table
| Model | Compatible heating | Fitting | Subscription | Matter | Who it is for |
|---|---|---|---|---|---|
| Netatmo Smart Modulating Thermostat | OpenTherm boiler only | wireless | not mentioned | not mentioned | OpenTherm boiler |
| Netatmo Smart Thermostat ORIGINAL | gas, oil, air-to-water heat pump, stove | wired or wireless | not mentioned | yes, with Thermo Hub | Matter home, on/off heating |
| tado° Smart Thermostat V3+ | boiler, OpenTherm according to Que Choisir | wired or wireless kit | Auto-Assist paid for the automations | not documented | geolocation |
| tado° Smart Thermostat X | relay or OpenTherm boiler, underfloor heating | not documented | AI Assist | not mentioned | new tado° setup |
| Netatmo Smart Thermostat | boilers, heat pumps, underfloor heating, not OpenTherm | direct or through a relay | not documented | not documented | on/off boiler |
The data comes from the Netatmo and tado° pages and from Que Choisir’s reviews.
To compare the offers for the models we detail, here they are side by side.
- Netatmo Smart Modulating Thermostat (OTH-PRO), wireless thermostat for OpenTherm boilersControls an OpenTherm boiler wirelessly and lets it modulate its output. It is set up in the Home + Control app.AmazonSee at Amazon
- Netatmo ORIGINAL smart thermostat for individual heating (wireless or wired kit)Connected thermostat from the Netatmo Original range, sold as a wireless or wired kit. It is controlled from the app for individual heating.AmazonSee at Amazon
- tado° V3+ Wireless Smart Thermostat Starter KitLowers the heating when your phone leaves home and manages several rooms with V3+ compatible heads. Some automations need the Auto-Assist subscription.AmazonSee at Amazon
- Netatmo Smart Thermostat for individual boilers (NTH01-FR-EC)Wireless connected thermostat with a Relay, controlled from a smartphone app. It works with most individual boilers.AmazonSee at Amazon
Buying at the right time
The dates of Black Friday 2026 and the other categories worth watching are on our page of real Black Friday 2026 tech deals. Our guide to checking a crossed-out price explains the method before you pay.
- Check your boiler’s compatibility before the sale, not after: a discounted thermostat that cannot talk to your boiler is still useless.
- With tado°, compare the price of the kit and the cost of the subscription over several years: read the Auto-Assist price on the store of your country.
- If you are extending a tado° installation, buy heads from the same range as your thermostat.
- Be wary of advertised savings: in December 2021, the UK magazine Which? disputed tado°’s method and judged Google Nest’s figures to be based on assumptions.

The Google Nest case
In April 2025, Google announced it would release no new Nest thermostat in Europe; in France, the Nest Learning Thermostat and the Nest Thermostat E remained on sale until stocks ran out. First and second generation Nest Learning Thermostats, from before 2015, have not been supported since October 2025: pairing no longer works and only manual use remains. We could not check which Nest models are still sold in November 2026, and we do not include them in this selection.
Complete your setup: our accessory selection
Choose these accessories to suit your installation: check the compatibility of each before buying.
- tado° Smart Radiator Thermostat X, connected thermostatic headFits the thermostatic valve of a radiator and sets the temperature room by room. It needs the Bridge X or a Thread border router and does not work with the V3+ range.AmazonSee at Amazon
- Energizer Ultimate Lithium AAA (L92) batteries, pack of 41.5 V non-rechargeable lithium AAA batteries for devices that run for a long time on batteries. They cope well with temperature extremes and keep well in storage.AmazonSee at Amazon
- Tapo T310 smart temperature and humidity sensorMeasures a room's temperature and humidity and shows them in the app. It works with a Tapo hub, sold separately.AmazonSee at Amazon
- Tapo T110 smart door and window contact sensorSends an alert to your phone when a door or window opens. It works with a Tapo hub, sold separately.AmazonSee at Amazon
Frequently asked questions
Does a smart thermostat really save money?
We cannot promise any percentage: we found no verified official figure specific to smart thermostats. In December 2021, Which? disputed tado°’s method and judged Google Nest’s figures to be based on assumptions; the magazine cited the Energy Saving Trust, which says each degree added to the set temperature raises the heating bill by about 10%. Schedules and away mode serve to lower that set temperature when nobody is home.
Which smart thermostat for a gas boiler?
For an OpenTherm gas boiler, take the Netatmo Smart Modulating Thermostat, the tado° Smart Thermostat X or the tado° V3+, which is OpenTherm according to Que Choisir. For a gas boiler switched on and off, the Netatmo Smart Thermostat ORIGINAL or the older Netatmo Smart Thermostat will do. In every case, run your boiler model through the manufacturer’s compatibility tool, for example Netatmo’s.
Which smart thermostat for electric radiators?
No model in this selection is documented by our sources for electric radiators on a pilot wire: ask your radiator manufacturer which control solution it provides. Smart radiator valves, for their part, fit on the thermostatic valve of a water radiator.
Can you install a smart thermostat yourself?
Yes: Netatmo presents the Smart Thermostat ORIGINAL as something you can install yourself in under 30 minutes, wired or wireless, and the Modulating model is fitted wirelessly. Switch the power off at the consumer unit before any wiring. If you have any doubt about your boiler, call a professional, and read its manual first.
Photo credits: Nest smart thermostat demo (Creative commons by https://heatable.co.uk/) by Heatable, licence CC BY 2.0; Gas boiler hung on kitchen wall (Creative commons by https://heatable.co.uk/) by Heatable, licence CC BY 2.0; I’ll keep you warm in the dark… by Todd Baker << technowannabe, licence CC BY 2.0
Share this content:
