Advertisement
Smartphone

Wireless Charger Not Working? What to Check and How to Fix It

An off-center phone, a thick case or a weak adapter is enough to stop wireless charging. The checks Apple, Samsung and Google document run from the simplest to the most involved.

5 min read

Smartphone resting on a wireless charging pad, with a magnifying glass and a warning sign
Table of contents
  1. Common symptoms and causes
  2. Before you start
  3. Solution 1: recenter the phone and remove the case
  4. Solution 2: check the power adapter and the cable
  5. Solution 3: let it cool down, restart and update
  6. Solution 4: check the phone’s charging settings
  7. Solution 5: try another phone or another charger
  8. If nothing works
  9. Take better care of your wireless charger: our toolbox
  10. Frequently asked questions
    1. Why has my wireless charger stopped working?
    2. Why won’t my iPhone charge on a wireless charger?
    3. Can a case stop wireless charging?
    4. Why is the light on my wireless charger blinking?
    5. How do I turn on wireless charging on a Samsung?

This article contains affiliate links: if you buy through them, Wanda-techs earns a commission at no extra cost to you.

Is your wireless charger not working, or does charging keep cutting out? Apple says a thick, metal or battery case can slow or stop charging, and Samsung’s pads flash red when the phone sits in the wrong spot. Start with how the phone is placed, then check the power adapter, heat and settings.

Advertisement

Common symptoms and causes

  • The phone does not support wireless charging (an iPhone older than the iPhone 8, a Galaxy A or XCover series phone, or a Pixel 10 on a Pixel Stand).
  • The phone is off-center, or a notification vibration has nudged it out of place.
  • A thick, metal or battery case, a ring, or a magnetic card holder is in the way.
  • The power adapter is too weak, or the cable is not the original one.
  • The phone got too hot and the system is limiting charging.
  • The light on a Samsung pad flashes red, or the light on a Pixel Stand stays orange: the phone is misplaced or something is blocking it.
  • The iPhone is also plugged in over USB.

Before you start

Wireless charging relies on the Qi standard. First check that your phone supports it.

  • iPhone: Qi charging needs an iPhone 8 or later and a Qi-certified charger. Some chargers require the latest version of iOS.
  • Samsung: Galaxy A and XCover series phones are not compatible. A foldable charges closed, with its back facing the pad.
  • Google Pixel Stand: it works with the Pixel 3 to Pixel 9, except the Pixel 6a, Pixel Fold and Pixel 9 Pro Fold. The Pixel 10 and later charge with Pixelsnap accessories, not the Pixel Stand.

Warning: never puncture, bend or heat a lithium battery. A swollen battery will not recharge and must go to a collection point.

Work on a non-flammable surface. Samsung and Google both warn that a metal or magnetic object slipped between the phone and the charger makes the whole setup heat up: remove it, separate the phone from the pad and let both cool down.

Warning: magnetic wallets and mounts can damage the magnetic stripes and RFID chips of bank cards, badges and passports. Take them off before you put the phone down. Before the iOS update in solution 3, Apple asks you to back up your iPhone.

Warning: do not open the pad or the phone, because opening the device can void the warranty. Check when your warranty ends before taking any step. A charger from a brand other than your phone’s is not guaranteed compatible by the phone’s maker.

Solution 1: recenter the phone and remove the case

  1. On an iPhone, unplug the USB cable: the iPhone does not charge wirelessly while it is plugged in over USB.
  2. Place the phone face up, in the middle of the charger, with nothing between the two.
  3. Remove a thick, metal or battery case and, on a Galaxy, any case that is not approved.
  4. Take off the wallet, card holder or any magnetic object attached to the back.
  5. On a Galaxy connected to earbuds, lay the phone on its side, horizontally.
  6. On a Pixel, remove stands and grips, rings, MagSafe accessories, PopSockets and metal stickers.
  7. With a Pixel Stand, use a case no thicker than 3 mm.
  8. With a Pixel Stand 2, place the phone in portrait orientation: the first Pixel Stand also accepts the phone laid horizontally.
  9. If an iPhone shifts when it vibrates, turn off vibrations or turn on Do Not Disturb.
  10. Clean the Pixel Stand’s surface with isopropyl alcohol, then let it dry.

On an iPhone, charging starts within a few seconds and the charging icon appears in the status bar. On a Samsung pad, the light turns solid red while charging, then green once the battery is full.

Advertisement

On a Pixel Stand, the light glows solid white for 3 to 4 seconds when charging starts.

chargeur-sans-fil-ne-fonctionne-plus-1-1024x576 Wireless Charger Not Working? What to Check and How to Fix It
Phone centered, with no thick case or magnetic object between it and the pad.

Solution 2: check the power adapter and the cable

  1. On a Galaxy, unplug the cable from the charger, then plug it back in.
  2. On a Galaxy, check that the wall outlet works.
  3. On an iPhone, plug the charger into the adapter supplied or recommended by its maker.
  4. With a Samsung charger, use the original charger and USB cable, because a different cable can disable wireless charging.
  5. With a Pixel Stand 2, use an adapter rated at least 12 W: a third-party adapter limits charging to 5 W.
  6. For fast charging on the Pixel Stand 2, up to 23 W, use a 30 W USB PD adapter that delivers at least 14 V, with the 1.5 m USB-C cable supplied.

While charging, the light on a Samsung pad is solid red. On a Pixel Stand, a slow orange blink, about every 2 seconds, means the adapter is not compatible.

Tip: Samsung says an ordinary adapter will not give you fast charging, which needs a compatible adapter, cable and accessories. To test your cable, follow our guide on how to check whether a USB-C cable supports fast charging.

If your adapter is the culprit, here are two USB-C wall adapters to compare.

  • Anker Nano 20 W USB-C wall charger (PowerPort III)Compact USB-C charger that powers most phones at full speed. A reliable charger rules out a faulty power source.AmazonSee at Amazon
  • Samsung 25 W USB-C wall charger (EP-TA800)A USB-C wall charger that powers a phone or a charging cable. Useful as a spare for the cable of a smartwatch.AmazonSee at Amazon

Solution 3: let it cool down, restart and update

  1. Move the phone and the charger somewhere cooler.
  2. On a Pixel, keep them out of direct sunlight.
  3. On a Pixel, take the case off while charging.
  4. On a Galaxy, avoid gaming, streaming and navigation while charging.
  5. On a Pixel, leave the screen off while charging.
  6. On a Pixel, turn on airplane mode if the network signal is weak.
  7. On a Pixel, restart the phone once it has cooled down.
  8. On a Galaxy, force a restart by holding the Power and Volume down buttons until the phone restarts (the combination varies by model).
  9. On an iPhone, back up your data.
  10. Plug the iPhone into power.
  11. Connect the iPhone to Wi-Fi.
  12. Open Settings > General > Software Update.
  13. Tap “Download and Install”.
  14. With a Pixel Stand, update the phone’s software, then finish setting up the Pixel Stand app.

A little warmth while charging is normal. When an iPhone gets too hot, its software may limit charging to 80%, then resume once it has cooled. Samsung also limits charging when the phone or the room is too hot or too cold.

chargeur-sans-fil-ne-fonctionne-plus-2-1024x576 Wireless Charger Not Working? What to Check and How to Fix It
Too hot, the phone limits charging: let it cool down.

Good to know: on a Pixel, slower charging after 80% is normal with adaptive charging.

Advertisement

Solution 4: check the phone’s charging settings

On a Galaxy, the labels depend on your One UI version. Samsung’s help pages give two paths.

  1. Open Settings > Battery > Charging settings. On some versions the path goes through Device care, then Battery, then Charging settings.
  2. Check that the wireless charging option, called “Wireless charging” or “Fast wireless charging” depending on the version, is turned on.
  3. For fast charging, also check that “Fast charging” is turned on.

On an iPhone, Apple documents no wireless charging setting. Go straight to solution 5. On a Galaxy, the Wireless PowerShare toggle in the quick settings panel does the opposite: it charges another Samsung or Qi-compatible device, and stops at the battery level you set.

Solution 5: try another phone or another charger

  1. Place another compatible phone on your charger.
  2. Place your phone on another charger.
  3. On a Galaxy, open Members > Support > Get started in the Samsung Members app to run the phone diagnostics.
  4. Choose the “Wireless charging” test.
  5. Also run “Battery status” to check the battery.

If the charger fails with every phone, the charger is at fault. If your phone will not charge on any charger, the problem is the phone: our guide on a phone that stopped charging takes over, with a dedicated page for the iPhone that won’t charge.

If nothing works

A charger that charges no phone falls under its warranty or its maker’s customer service.

If the charger is the problem and out of warranty, here is a Qi induction pad to replace it.

chargeur-sans-fil-ne-fonctionne-plus-300x169 Wireless Charger Not Working? What to Check and How to Fix It

Anker PowerWave Pad 10 W Qi wireless charger

A flat Qi pad: set the phone on it and it charges without a cable. It spares the charging port from daily plugging.

Take better care of your wireless charger: our toolbox

A few useful accessories for charging wirelessly and by cable in good conditions.

  • Anker PowerWave Pad 10 W Qi wireless chargerA flat Qi pad: set the phone on it and it charges without a cable. It spares the charging port from daily plugging.AmazonSee at Amazon
  • Anker Nano 20 W USB-C wall charger (PowerPort III)Compact USB-C charger that powers most phones at full speed. A reliable charger rules out a faulty power source.AmazonSee at Amazon
  • Samsung 25 W USB-C wall charger (EP-TA800)A USB-C wall charger that powers a phone or a charging cable. Useful as a spare for the cable of a smartwatch.AmazonSee at Amazon
  • Anker 310 USB-C to USB-C cable, 0.9 mUSB-C cable for charging and transferring data. A good cable avoids charging faults caused by a worn lead.AmazonSee at Amazon

Frequently asked questions

Why has my wireless charger stopped working?

The phone may be off-center, separated from the pad by a thick case or a metal object, or powered by an adapter that is too weak. Overheating also limits charging, and some phones are not compatible, such as the Galaxy A and XCover series.

Why won’t my iPhone charge on a wireless charger?

You need an iPhone 8 or later and a Qi-certified charger, and some chargers require the latest version of iOS. The iPhone does not charge wirelessly while it is plugged in over USB. If it gets too hot, it may also limit charging to 80% until it cools down.

Can a case stop wireless charging?

Yes. Apple says a thick, metal or battery case can slow or stop charging, and Samsung asks you to remove a thick or non-approved case. For the Pixel Stand, Google sets the limit at 3 mm of thickness.

Why is the light on my wireless charger blinking?

On a Samsung pad, a flashing red light means the phone is misplaced. On a Pixel Stand, a slow orange blink about every 2 seconds means the adapter is not compatible, while a single orange blink the first time you plug it in is normal. Colors vary with the charger and the case.

How do I turn on wireless charging on a Samsung?

Open Settings > Battery > Charging settings and check that “Wireless charging” or “Fast wireless charging” is turned on, depending on your One UI version. On some versions the path goes through Device care, then Battery, then Charging settings. Galaxy A and XCover series phones do not support wireless charging.

Share this content:

Leave a Reply

Your email address will not be published. Required fields are marked *