Advertisement
Home appliances and smart home

Dehumidifier not working anymore: what should you check?

A dehumidifier that won't start, collects no water or keeps its tank light on can be checked without tools. Tank, humidistat, filter, room temperature and drain: the checks in order.

7 min read

Water drop with a warning sign, a diagnostic magnifying glass and a flat wrench
Table of contents
  1. Common symptoms and causes
  2. Before you start
  3. Solution 1: power, full tank and float
  4. Solution 2: adjust the humidistat
  5. Solution 3: clean the filter and clear the vents
  6. Solution 4: room too cold, dehumidifier freezing up
  7. Solution 5: check the continuous drain
  8. If nothing works
  9. Take better care of your dehumidifier: our toolbox
  10. Frequently asked questions
    1. Why has my dehumidifier stopped working?
    2. Why is my dehumidifier not collecting water?
    3. Why is my dehumidifier freezing up?
    4. How do I clean a dehumidifier filter?
    5. What temperature does a dehumidifier work at?

This article contains affiliate links: if you buy through them, Wanda-techs earns a commission at no extra cost to you.

Your dehumidifier stopped working: it won’t start, it runs without filling its tank, or the full-tank light stays on. The usual causes are a full or badly seated tank, a dislodged float, a humidity setting that has already been reached, a clogged filter or a room that is too cold. You can check all of it without tools and without opening the unit.

Advertisement

Common symptoms and causes

  • The unit won’t start: plug not pushed in, blown fuse or tripped breaker, tank full or badly seated, target humidity already reached.
  • It runs but collects no water: room too cold, air not humid enough, dirty filter, blocked vents, windows or doors left open.
  • The tank light stays on: dislodged float, tank not fully emptied and, on some models, a badly placed drain hose.
  • Frost builds up: room too cold.
  • Water leaks onto the floor: loose hose or fitting, drain plug removed.

Before you start

A compressor dehumidifier contains a refrigerant, the gas that circulates in its cooling circuit. It also has coils, the cold tubes where moisture from the air condenses.

Indicator lights, temperature limits and error codes change from one brand and model to another. Keep your model’s manual within reach.

Warning: unplug the unit from the mains before opening it, and never work on a unit that is plugged in. The capacitors in some appliances (TVs, microwaves, power supplies) stay charged after unplugging: do not touch them. Also switch off and unplug the dehumidifier before cleaning the filter or the tank.

Warning: opening the unit can void the warranty, so check when it ends first. Never open the refrigerant circuit: a compressor failure or a leak is a job for the manufacturer’s service.

Solution 1: power, full tank and float

A full or badly seated tank stops the unit from starting, or switches it off. The float is a small part that detects the water level. It sometimes comes loose in transit on a new unit, or when you forget to put it back after cleaning the tank.

  1. Check that the plug is pushed all the way into the wall socket.
  2. Check the fuse or circuit breaker.
  3. Pull the tank out of the unit.
  4. Empty it completely.
  5. Check that the float sits at the very top of its housing, on models that have one.
  6. Snap the float back into place if it came loose.
  7. Slide the tank back in firmly.

The tank light should go out and the unit should restart. If it stays on after these steps, De’Longhi advises contacting an authorized repair center.

Advertisement
deshumidificateur-ne-fonctionne-plus-1-1024x576 Dehumidifier not working anymore: what should you check?
Tank emptied completely and float snapped back in: the light should go out.

Solution 2: adjust the humidistat

The humidistat is the setting for the humidity level you are aiming for, as a percentage. When the room air reaches that level, the unit won’t start or it stops. That is normal operation, not a fault.

  1. Read the target humidity shown on the display or dial.
  2. Lower the target if the room air still feels damp.
  3. Let the unit run and see whether it restarts.

The unit should start running again, and the tank should slowly fill up.

Good to know: De’Longhi’s FAQ says that when the unit collects no water, you should set the humidistat to a higher value, and it names air that is not humid enough as a likely cause. That is the opposite of Midea’s manual. Check which way the setting works in your model’s manual.

A hygrometer shows the real humidity level in the room, so you can set the humidistat knowing where you stand.

deshumidificateur-ne-fonctionne-plus-300x169 Dehumidifier not working anymore: what should you check?

ThermoPro TP49: indoor thermometer and hygrometer

Shows the temperature and the humidity level of a room on one screen. Handy for checking that a dehumidifier or heater is doing its job.

Solution 3: clean the filter and clear the vents

A dirty air filter reduces drying. Curtains, blinds or furniture placed in front of or behind the unit have the same effect.

  1. Switch the unit off and unplug it.
  2. Pull the filter outward to take it out.
  3. Wash it with clean water.
  4. Let it dry.
  5. Put it back in place.
  6. Move curtains, blinds and furniture away from the front and back of the unit.
  7. Close the windows and doors of the room.

The unit should dry the air again and fill its tank.

Advertisement

Warning: never run the unit without its filter.

While you are at it, wash the tank: Midea recommends cleaning it every few weeks with water and a mild detergent, rinsing it, and never putting it in the dishwasher. A source of steam in the room also reduces drying.

Tip: according to the Midea manual we read, on a connected model a light reminds you to clean the filter after 250 hours of operation, and holding the fan button for 3 seconds resets it. This is not confirmed for other models. According to a retailer, a washable filter needs cleaning about every two months and a replaceable one needs changing at around six months; your model’s manual takes precedence.

Solution 4: room too cold, dehumidifier freezing up

In a room that is too cold, moisture stays on the walls and objects, so the unit pulls in very little water. According to De’Longhi, this kind of use does not damage the unit, but it loses efficiency.

The threshold differs by brand: Midea says drying is affected below 5 °C (41 °F), while De’Longhi advises a room heated to around 18 to 20 °C (64 to 68 °F) to collect water.

  1. Heat the room to about 18 to 20 °C (64 to 68 °F).
  2. Look in the manual for your model’s operating temperature range.
  3. Leave the unit on if a little frost appears on the coils: on Midea models, defrosting is automatic.
  4. Switch off and unplug the unit if the frost persists.
  5. Let the frost melt before plugging it back in.

The tank should start filling again once the room has warmed up. Steps 4 and 5 come from a retailer, not a manufacturer; the melting time and the exact thresholds are in the manual.

deshumidificateur-ne-fonctionne-plus-2-1024x576 Dehumidifier not working anymore: what should you check?
In a room heated to around 18 to 20 °C (64 to 68 °F), the unit collects water again.

To heat the room, see also our guide electric heater not heating: what to check.

Solution 5: check the continuous drain

With continuous drainage, water flows through a hose to a sink or a trap instead of filling the tank. A loose hose or fitting lets water run onto the floor. On some models, a badly placed hose would also turn on the full-tank light.

Warning: water stays in the hose. Dry the area before moving the unit.

  1. Push the hose all the way into the drain outlet.
  2. Tighten the fitting if it has play.
  3. Place the unit higher than the sink or drain point.
  4. Stretch the hose so it runs down from the fitting with no kink and no section that rises.
  5. Put the drain plug back at the rear if you use the tank rather than the hose.

Water should flow through the hose with no puddle on the floor. The link between a kinked or blocked hose and the full-tank light comes from a single brand, Frigidaire. It is not confirmed for other models.

If nothing works

Stop in these cases: the tank light is still on after emptying the tank and refitting the float, no water is collected in a room at 18 to 20 °C (64 to 68 °F) with a clean filter and a correctly set humidistat, an unusual noise, or a suspected refrigerant leak. These are jobs for the manufacturer’s service or an authorized repairer.

An error code on the display also sends you to the manual. Midea, for example, uses the codes EH60, EH61, P2, EC, Eb and EH0b, whose meaning is in the model’s manual.

Before you call, write down the code shown. For a recent unit, ask the seller about the legal guarantee that applies in your country.

If the unit is too old or the repair costs more than a new one, here are two compressor dehumidifiers to compare.

  • De'Longhi Tasciugo AriaDry DEX216F: 16 L/day electric dehumidifierCompressor dehumidifier with an adjustable humidistat and a laundry drying mode. It suits medium-sized rooms that stay damp.AmazonSee at Amazon
  • Midea MDDF-20DEN7-WF: 20 L/day smart dehumidifier, 3 L tankCompressor dehumidifier with a 3 L tank and app control. It covers a room of about 40 m².AmazonSee at Amazon

Take better care of your dehumidifier: our toolbox

A few products to measure humidity, heat the room or replace the unit when the time comes.

  • ThermoPro TP49: indoor thermometer and hygrometerShows the temperature and the humidity level of a room on one screen. Handy for checking that a dehumidifier or heater is doing its job.AmazonSee at Amazon
  • De'Longhi Tasciugo AriaDry DEX216F: 16 L/day electric dehumidifierCompressor dehumidifier with an adjustable humidistat and a laundry drying mode. It suits medium-sized rooms that stay damp.AmazonSee at Amazon
  • Midea MDDF-20DEN7-WF: 20 L/day smart dehumidifier, 3 L tankCompressor dehumidifier with a 3 L tank and app control. It covers a room of about 40 m².AmazonSee at Amazon
  • De'Longhi Dragon 4 TRDX40820E: 2000 W oil-filled radiatorOil-filled radiator with adjustable thermostat for steady, quiet heat. It warms a cold room without drying the air too much.AmazonSee at Amazon

Frequently asked questions

Why has my dehumidifier stopped working?

Start with the tank, which may be full or badly seated, and with the humidity setting, which may already be reached. Check the plug and the breaker too. If the tank light stays on, check the float.

Why is my dehumidifier not collecting water?

The room may be too cold or the air not humid enough. A dirty filter, blocked vents or an open window also reduce drying. De’Longhi advises a room heated to around 18 to 20 °C (64 to 68 °F).

Why is my dehumidifier freezing up?

Most often the room is too cold. A little frost on the coils is normal, and some models defrost on their own. If it persists, unplug the unit, let it melt, then warm the room.

How do I clean a dehumidifier filter?

Switch off and unplug the unit, pull the filter outward, wash it with clean water, let it dry and put it back. Never run the unit without a filter. How often depends on the model: follow the manual.

What temperature does a dehumidifier work at?

It depends on the model: Midea says drying is affected below 5 °C (41 °F), and De’Longhi advises 18 to 20 °C (64 to 68 °F) to collect water. The exact range is in your unit’s manual.

Share this content:

Leave a Reply

Your email address will not be published. Required fields are marked *