This article contains affiliate links: if you buy through them, Wanda-techs earns a commission at no extra cost to you.
To read fault codes with a Bluetooth OBD2 scanner on an iPhone or an Android phone, our pick is the OBDLink CX, which uses Bluetooth 5.1 low energy and the free OBDLink app. The OBDLink MX+ suits heavier use and the Ford and GM networks, the Vgate iCar Pro suits simple reading with a third-party app, and the Autel MaxiAP AP2500 suits home maintenance such as an oil service reset.
No prices here: Black Friday offers change by the hour, and the offer tables show them up to date.
Our picks at a glance
- OBDLink CX: our pick for an iPhone or an Android phone, with Bluetooth 5.1 low energy and a standby draw under 1 mA.
- OBDLink MX+: for heavier use, on iOS, Android and Windows, with the MS-CAN and SW-CAN networks of Ford and GM.
- Vgate iCar Pro: for reading and clearing codes with a third-party app such as Car Scanner, in the BLE 4.0 version for iPhone.
- Autel MaxiAP AP2500: for home maintenance (oil service, tyres, battery) and the battery test for hybrids and electric cars.
We only pick models whose specifications we read on a manufacturer’s page. Launch and Thinkcar dongles and Vgate’s vLinker range are missing for that reason: no readable official page gave their Bluetooth version and supported systems.
Before you start
An OBD2 scanner plugs into the car and can clear codes or start maintenance functions. Read these rules before the first connection.
Warning: switch the ignition off before any work; do not touch airbags, seat belt pretensioners or the high-voltage circuit of a hybrid or electric vehicle; a red warning light means stop the vehicle; reading a code does not replace a diagnosis at a garage.
Warning: clearing a code without fixing the cause solves nothing, and the light comes back. According to L’argus, a source we could not cross-check, a flashing engine light means you must stop driving. A maintenance function that touches the parking brake, the ABS or the particulate filter is a safety matter: follow the manufacturer’s procedure.
Warning: do not open the adapter; unplug any mains-powered device before opening it and never work on a device that is plugged in; the capacitors of some devices (televisions, microwave ovens, power supplies) stay charged after unplugging: do not touch them.
Good to know: the adapter often stays plugged into the socket. OBDLink states a standby draw under 1 mA for the CX and 2 mA for the MX+; Vgate does not give this figure for the iCar Pro.
How to choose a Bluetooth OBD2 scanner
A Bluetooth OBD2 scanner is a small module that plugs into the car’s diagnostic port and sends its data to a phone. A basic reader reads and clears the engine fault codes.

Bluetooth car diagnostic scanner: compatibility with your car
In Europe, the EOBD standard (the European version of OBD) comes from Directive 98/69/EC. Remember this rule: petrol from 2000-2001, diesel from 2003-2004, depending on the date of first registration.
The detail for diesel is finer. Passenger cars were covered on 1 January 2003 for newly approved types, then on 1 January 2004 for all new vehicles. For newly approved light diesel commercial vehicles, the date is 1 January 2005 or 2006 depending on their class.
Classic Bluetooth, Bluetooth LE and iPhone
On an iPhone, an adapter must use Bluetooth LE (low energy, version 4.0 or later), Wi-Fi, or be MFi certified. A classic Bluetooth 1.x to 3.x adapter without MFi certification does not work on iOS.
Android is less demanding. The publisher of Car Scanner recommends classic Bluetooth there, and the old Torque wiki rates it faster than Bluetooth LE.
Good to know: on the OBDLink CX, pairing is done in the app, not in the phone’s Bluetooth settings.
The bundled app or a third-party app
OBDLink supplies its free app for the CX, and Autel its MaxiAP Diag app for the AP2500. Third-party app publishers post lists of recommended adapters.
Car Scanner lists the OBDLink MX+, the OBDLink CX and the Vgate iCar Pro BLE. OBD Fusion lists the Vgate iCar Pro BT3.0 for Android.
What the scanner does beyond codes
The Autel AP2500 adds maintenance functions and the advanced diagnosis of one make. The OBDLink CX works with BimmerCode for BMW. The OBDLink MX+ adds the Ford and GM networks.
Bluetooth ELM327 clones
For generic adapters sold under the ELM327 name, the publisher of Car Scanner warns that a version number, a chip or a number of circuit boards does not prove quality. A poor adapter loses data, ignores commands and can disturb the vehicle’s network.
On an iPhone, the question is settled quickly: generic Bluetooth ELM327 adapters do not work there, according to OBD Fusion.
OBDLink CX: our pick for iPhone and Android

OBDLink CX, Bluetooth 5.1 LE OBD2 adapter
Connects the car diagnostic port to an iPhone or Android phone over Bluetooth Low Energy. It reads fault codes with the free OBDLink app and works with BimmerCode for BMW cars.
- AmazonSee at Amazon
The OBDLink CX talks to an iPhone or an Android phone over Bluetooth 5.1 LE, through the free OBDLink app. Pairing is done in the app. It measures 46 x 23 x 33 mm and weighs 20 g.
Its data sheet lists the CAN, J1939, ISO 9141 and ISO 14230 protocols. Its BatterySaver function limits standby to under 1 mA. It is designed for BimmerCode and recommended by the team behind that BMW coding app.
OBDLink states a 3-year warranty and 180 days to get your money back.
Its limits: its data sheet does not mention Windows, unlike the MX+. The Torque wiki puts Bluetooth LE adapters like the CX among the slow models ill suited to CAN, an old opinion dating from the Android 4 era. OBDLink’s US shop showed it out of stock on 19 November 2026.
OBDLink MX+: for heavier use

OBDLink MX+, Bluetooth OBD2 scanner for iPhone, Android and Windows
Reads and clears fault codes and supports the MS-CAN and SW-CAN networks of Ford and GM cars. Firmware updates and manufacturer add-ons are provided free of charge.
- AmazonSee at Amazon
The OBDLink MX+ works on iOS, Android and Windows, over class 2 Bluetooth 3.0 with 128-bit encryption. On an iPhone, it goes through MFi certification, according to the publisher of Car Scanner. It handles all the regulated OBD-II protocols, plus the MS-CAN and SW-CAN networks of Ford and GM.
It reads and clears the engine light. OBDLink provides firmware updates and per-make add-on modules free of charge, and many third-party apps support it.
The stated warranty is 3 years, with the same 180-day period.
Its limits: its BatterySaver standby draws 2 mA, against under 1 mA for the CX.

Vgate iCar Pro: for simple use with Car Scanner

Vgate iCar Pro, Bluetooth 4.0 BLE OBD2 adapter
Reads and clears fault codes with a third-party app such as Car Scanner. The BLE 4.0 version works on iPhone and Android.
- AmazonSee at Amazon
The Vgate iCar Pro comes in two versions you must not mix up. The BLE 4.0 version works on Android and iOS; the BT3.0 version works on Android only. A Wi-Fi version also exists for both systems.
According to the publisher of Car Scanner, the BLE version combines Bluetooth 2.0 and 4.0 and works on iOS, Android and Windows. For extended CAN addressing, used by Toyota and BMW, it needs firmware v4.1.02 or later.
The adapter goes to sleep 30 minutes after the engine stops. It wakes on a Bluetooth connection, on unlocking or on engine start (petrol cars). OBD Fusion lists the BT3.0 version for Android.
Its limits: Vgate does not give the standby draw. The same Car Scanner page prefers the newer iCar Pro 2S, which we could not check on an official data sheet.
Tip: for an iPhone, look for the BLE 4.0 mention in the listing before you order.
Autel MaxiAP AP2500: for home maintenance

Autel MaxiAP AP2500, Bluetooth OBD2 maintenance scanner
Reads and clears codes, resets the oil service and relearns tyre pressure sensors with the MaxiAP Diag app. It also tests the battery of hybrid and electric cars.
- AmazonSee at Amazon
The Autel MaxiAP AP2500 communicates over Bluetooth 5.0 or later (BR/EDR and BLE), with the free MaxiAP Diag app. It reads and clears OBDII codes and shows emissions test results, the freeze-frame snapshot taken when the fault occurred, and live data. It recognises the VIN, the vehicle identification number, and supports CAN FD.
For home maintenance, it offers the oil service reset, tyre pressure sensor relearning, registration of a new battery and a wiper replacement mode. It also tests the battery of hybrids and electric cars, with the state of charge and the state of health. The advanced diagnosis of one make is included; other makes are bought in the app.
It succeeds the AP200, which Autel’s US page lists as discontinued.
Its limits: the official AP2500 page does not state the supported systems or the warranty length. The Autel text repeated by resellers mentions Android, iOS and a limited one-year warranty, but we could not read it on Autel’s own site. A US reseller lists it as no longer available new in the United States, and we could not check its availability in Europe.
Comparison table
| Model | Bluetooth | Systems | Beyond codes | Who it suits |
|---|---|---|---|---|
| OBDLink CX | 5.1 LE | iOS, Android | BimmerCode | iPhone or Android, everyday use |
| OBDLink MX+ | 3.0 classic, MFi | iOS, Android, Windows | Ford and GM networks | Heavier use, Windows |
| Vgate iCar Pro BLE 4.0 | 2.0 + 4.0 (BLE) | iOS, Android | Third-party apps | Simple reading, iPhone |
| Vgate iCar Pro BT3.0 | 3.0 classic | Android | Third-party apps | Simple reading, Android |
| Autel MaxiAP AP2500 | 5.0+ (BR/EDR, BLE) | Not stated by Autel | Maintenance, one make included | Home maintenance |
Sources: manufacturers’ data sheets and the Car Scanner publisher.
To compare the offers on the four models side by side, here they are together.
- OBDLink CX, Bluetooth 5.1 LE OBD2 adapterConnects the car diagnostic port to an iPhone or Android phone over Bluetooth Low Energy. It reads fault codes with the free OBDLink app and works with BimmerCode for BMW cars.AmazonSee at Amazon
- OBDLink MX+, Bluetooth OBD2 scanner for iPhone, Android and WindowsReads and clears fault codes and supports the MS-CAN and SW-CAN networks of Ford and GM cars. Firmware updates and manufacturer add-ons are provided free of charge.AmazonSee at Amazon
- Vgate iCar Pro, Bluetooth 4.0 BLE OBD2 adapterReads and clears fault codes with a third-party app such as Car Scanner. The BLE 4.0 version works on iPhone and Android.AmazonSee at Amazon
- Autel MaxiAP AP2500, Bluetooth OBD2 maintenance scannerReads and clears codes, resets the oil service and relearns tyre pressure sensors with the MaxiAP Diag app. It also tests the battery of hybrid and electric cars.AmazonSee at Amazon
Buying at the right time
Black Friday falls on 27 November 2026 and Cyber Monday on 30 November 2026. An OBD2 scanner offer is judged first on the exact model and its compatibility with your phone, and only then on the price. To spot a fake discount, follow our method for checking a crossed-out price on Black Friday.
- Check the version: a Vgate iCar Pro BT3.0 will not work on an iPhone.
- Be wary of adapters under $10 and of names containing “mini”, which the publisher of Car Scanner advises against.
- Rule out the brands Car Scanner flags: xTool, KONNWEI, Micro Mechanic, THINMI.COM, KUULAA.
- After pairing, a Bluetooth address starting with
11:22:33or00:00:00points to a dubious clone. - Buy from a seller that accepts returns, as the Torque wiki advises.
- For the Autel AP2500, check that the listing names your system, iOS or Android, and count the price of the extra makes.

The other categories to watch during the week are gathered in our guide to the Black Friday 2026 tech deals. To equip the same car, see also which dash cam to choose on Black Friday.
Equip your car: our toolbox
A few accessories that help around a diagnosis: checking a voltage, looking after the battery, keeping the phone in view.
- AstroAI digital multimeter, 2000 countsMeasures DC and AC voltage, current and continuity. Lets you check whether a socket or a fuse really delivers power.AmazonSee at Amazon
- CTEK MXS 5.0 12 V battery charger with temperature compensationRecharges a car battery slowly and automatically, and adjusts the charge to the outside temperature. Can stay connected to maintain the battery.AmazonSee at Amazon
- UGREEN magnetic phone holder for air vent (MagSafe)Holds the phone on the air vent at eye level, magnetically. Needs a MagSafe case or a metal plate on the phone.AmazonSee at Amazon
- Anker 30 W car charger, USB-C and USB-APlugs into the 12 V socket and charges a phone and a second device at once. A good replacement when the old charger has failed.AmazonSee at Amazon
Frequently asked questions
Which app should I use with a Bluetooth OBD2 scanner?
Start with the manufacturer’s free app: OBDLink for the CX, MaxiAP Diag for the Autel AP2500. Car Scanner ELM OBD2 and OBD Fusion are third-party apps that publish lists of compatible adapters. OBD Fusion requires iOS 17 or later on an iPhone.
Is an OBD2 scanner compatible with every car?
No. In Europe, it covers petrol cars from 2000-2001 and diesel cars from 2003-2004, depending on the date of first registration. It must also suit your phone: on an iPhone, only Bluetooth LE, Wi-Fi or MFi adapters work.
For the Autel AP2500, the advanced functions cover one make; the others are paid for in the app.
Can you clear an engine light with an OBD2 scanner?
Yes, basic readers read and clear the engine codes, and the OBDLink MX+ clears the engine light. Clearing a code does not fix the cause: according to L’argus, a source we could not cross-check, the light stays on after a repair until a driving cycle confirms it.
According to the same source, a flashing engine light signals a catalytic converter that is destroying itself: stop driving and go to a garage.
Is a cheap ELM327 reliable?
Not predictably: the Torque wiki rates generic adapters as uneven, and some share the same address 11:22:33:DD:EE:FF. The publisher of Car Scanner advises against models under $10 and warns that a poor adapter can disturb the vehicle’s network, a risk for coding. On an iPhone, a generic Bluetooth ELM327 does not work.
Photo credits: Close-up of parking brake warning light on car dashboard by Ivan Radic, licence CC BY 2.0; Close-up of temperature gauge on car dashboard by Ivan Radic, licence CC BY 2.0
Share this content:
