This article contains affiliate links: if you buy through them, Wanda-techs earns a commission at no extra cost to you.
Your Garmin watch won’t charge: no battery icon when you set it on its cable, or a level that never moves. Garmin’s first lead is sweat and moisture. Even a small amount corrodes the charging contacts and can block charging.
Common symptoms and causes
- No charging icon or battery level when the watch is plugged in.
- Charging contacts corroded by sweat or moisture.
- Cable not clipped in properly, loose or damaged.
- Power source too weak, or watch plugged into a USB hub (according to an unofficial guide).
- Dead battery that takes a while to show any sign of charging.
- Screen stuck on a blue triangle, reported by users on watches that no longer start.
Before you start
Get the original Garmin charging cable for your model. Its connector is proprietary, meaning it is specific to Garmin.
You will also need a wall adapter or a computer USB port, and a soft lint-free cloth. Note the exact name of your watch (Forerunner 245, Venu 2S…), because buttons and some values change from one model to another.
Warning: never puncture, bend or heat a lithium battery. A swollen battery will not charge again and goes to a collection point for recycling.
Work on a non-flammable surface. Never scrape the contacts with a metal object. Garmin points to the Important Safety and Product Information guide supplied in the box.
Warning: the factory reset described in Solution 5 erases data. Sync the watch with Garmin Connect first if it still turns on. Settings and unsynced data will be lost.
Warning: opening the device may void the warranty, so check when it ends first. A hardware fault is a job for Garmin support, not for a screwdriver.
Solution 1: clean the watch’s charging contacts
The charging contacts are the small metal pads on the back of the watch. Garmin recommends cleaning and drying them, and the area around them, before every charge or connection to a computer.
- Take the watch off the charging cable.
- Rinse the watch with water, or wipe the contacts and the area around them with a damp lint-free cloth.
- Remove any visible debris with a soft, dry cloth, with no harsh chemicals or abrasives.
- Let the watch air-dry until it is completely dry.
- Set the watch back on the cable, with the connector firmly in place.
The charging icon or the battery level should appear on the screen. Step 3 (dry cloth, no abrasives or harsh products) comes from an unofficial guide: Garmin does not mention it in the pages we read. For the rest of the case and the strap, follow our guide to cleaning a smartwatch without damaging it.
Good to know: some unofficial guides recommend a dry cloth only. Garmin says water or a damp cloth, so follow the manufacturer’s advice, then dry the watch thoroughly.
Tip: after a workout, rinse and dry the back of the watch before putting it on the cable. Garmin advises this cleaning before every charge, and sweat is what attacks the contacts.

Solution 2: Garmin charging cable not working, adapter and USB port
Garmin lists two power sources: a computer USB port or a Garmin-approved wall adapter. The Forerunner 70 manual calls for an adapter of at least 5 W.
- Find the end of the cable marked with a triangle (Forerunner 70) or an up arrow (Forerunner 265). That end goes into the watch’s port.
- Line the connector up with the charging port and press until it sits firmly.
- Plug the other end into a computer USB port or a Garmin-approved wall adapter.
- Plug the cable in directly, with no USB hub and no damaged port.
- Leave the watch plugged in for 30 to 60 minutes if the battery was dead.
- Try another USB port or another adapter if nothing happens.
- Try a Garmin cable you know works with your model.
The charging icon should appear, then the level should climb. Unplug the watch at 100%.
Good to know: the 30 to 60 minute wait before a first sign of charging comes from an unofficial guide. The Forerunner 165 manual says a full charge of an empty battery can take up to 2 hours.
Avoiding the USB hub and trying another port, adapter or cable (steps 4, 6 and 7) also come from an unofficial guide. The Garmin manuals we read do not mention them.
Tip: if the second cable charges the watch, the first one is the culprit. Garmin sells replacement cables on garmin.com and through its dealers.
Solution 3: charge within a suitable temperature range
Each model has its own charging temperature range. A range of 0 to 45 °C (32 to 113 °F) is quoted for several models, but we could not confirm it on a Garmin page. Go by your watch’s manual.
- Check the charging temperature range in your watch’s manual.
- Charge the watch in a room whose temperature falls within that range.
The charging icon should appear when the watch is charged within the range given in its manual.
Solution 4: update the watch software
According to an unofficial guide, a software update can fix a charging fault that comes from the software. Garmin does not confirm this in the pages we read. This lead assumes the watch still turns on or communicates.
- Connect the watch to a computer with its cable.
- Open Garmin Express on the computer.
- Install the updates offered for the watch.
Another option, without a computer: sync the watch with the Garmin Connect app on your phone.
After the update, the watch should show the charging icon and the level should rise when it is plugged in.
Solution 5: force a restart of the watch
The official manuals we read do not describe a forced restart, and the button and the duration vary by model. The procedure below comes from user reports.
- Unplug the watch from the cable.
- Hold your model’s power button (see its manual) until the watch switches off.
- Wait before turning it back on: no Garmin page we read gives a duration.
- Turn the watch back on with the same button.
- Set the watch back on its cable.
The charging icon should appear. On the Forerunner 245, Garmin forum members say you sometimes have to hold LIGHT for up to 30 seconds to switch the watch off.

Garmin not charging with a blue triangle (Forerunner 245)
If the blue triangle stays on screen after the restart, Garmin forum members suggest a factory reset. It applies to the Forerunner 245 only. Last resort.
Warning: the next procedure erases data. Sync first if the watch still turns on. Settings and unsynced activities will be lost.
- Switch the watch off.
- Hold down the BACK and START/STOP buttons.
- Press LIGHT to turn the watch on, without releasing the other two buttons.
- Release START/STOP at the first beep.
- Release the other buttons at the second beep.
Then set the watch back on its cable: the charging icon should appear.
If nothing works
Clean, dry contacts, a cable and power source that work, a restart done: if the watch still won’t charge, it probably has a battery or hardware problem (a diagnosis the Garmin manuals we read do not confirm). Stop there and contact Garmin Product Support. Don’t open the watch.
Have these ready:
- the exact model and the serial number;
- the purchase date and proof of purchase, to check the warranty;
- a list of what you have already tried, cable and adapter included.
Under warranty, Garmin may offer to exchange the watch. If your model has other issues, see also the common Garmin Venu 2S problems and their solutions or those of the Garmin Venu X1.
Take better care of your Garmin watch: our toolbox
A few accessories to keep the contacts clean, plug the cable into a recent charger and protect the screen.
- Mistify screen cleaning spray 500 ml with 2 microfibre clothsCleans screens and glass surfaces without leaving streaks. The two microfibre cloths are soft and lint-free.AmazonSee at Amazon
- Keyboard and laptop cleaning kit, 11 piecesSoft brush, swabs and cloth for small gaps and dust. Handy for gently clearing debris from tiny ports and contacts.AmazonSee at Amazon
- UGREEN USB-C male to USB-A 3.0 female OTG adapterLets a USB-A cable plug into a USB-C charger or port. Useful when your charger no longer has a USB-A socket.AmazonSee at Amazon
- IQShield tempered glass for Garmin Venu 2S (2 pieces)Tempered glass protectors that guard the screen against scratches and knocks. Two pieces per pack, made for the Venu 2S.AmazonSee at Amazon
Frequently asked questions
Why is my Garmin watch not charging?
The causes found are contacts dirty or corroded by sweat, a cable that is loose or damaged, a power source that is too weak, or a dead battery. Garmin confirms that corroded contacts can block charging. If everything checks out, the battery or the watch itself may have failed, according to an unofficial guide and user reports.
How do I clean the charging contacts on a Garmin watch?
Rinse the watch with water or wipe the contacts with a damp lint-free cloth, then let it air-dry completely before charging. Garmin advises this cleaning before every charge. Never scrape the contacts with a metal object.
An unofficial guide also advises against abrasives and harsh chemicals.
What does the blue triangle on a Garmin watch mean?
According to Garmin forum users, the blue triangle shows up on a watch that no longer starts or no longer charges. The manuals we read give no explanation. Forum members suggest a forced restart, then, on the Forerunner 245, a factory reset that erases data.
Can I charge a Garmin watch with a phone charger?
The Garmin manuals we read do not say. The only confirmed requirement is a computer USB port or a Garmin-approved wall adapter, always with the Garmin cable.
The 5 W minimum appears only in the Forerunner 70 manual. If you are unsure about your charger, use a computer’s USB port.
Share this content:
