This article contains affiliate links: if you buy through them, Wanda-techs earns a commission at no extra cost to you.
If one AirPod won’t charge, or the case stays empty, start with the cable, the power adapter and clean contacts. On newer models, an iOS setting can also cap the charge on purpose.
The case light tells you which part is at fault: the earbuds or the case.
Common symptoms and causes
- The case won’t charge: a faulty cable, adapter or outlet, or a case sitting badly on a Qi or MagSafe wireless charger.
- Only one earbud, left or right, won’t charge in the case: debris or dirt on the contacts, or an earbud not seated properly in its slot.
- Charging stops before 100%: Optimized Battery Charging or, on AirPods Pro 3, Optimized Charge Limit caps it deliberately.
- The light flashes amber on a recent model: the level is below 95%, which isn’t necessarily a fault.
- Nothing helps: a worn lithium battery or a hardware defect, which Apple has to handle.
The light is on the front of the case for AirPods 3, 4 and 5, AirPods Pro 1, 2 and 3, and the wireless case of AirPods 1 and 2. On the Lightning case of AirPods 1 and 2, it sits inside, under the lid.
With the lid open and the AirPods inside, it shows the charge of the earbuds. With the AirPods out, it shows the charge of the case.
Green: charged. Amber: partly charged. No light: charge the case before use.
On AirPods 4, 5, Pro 2 and Pro 3 with recent firmware, a slow amber flash means the AirPods or the case are below 95%. A fast amber flash means the AirPods are below 95% and the case is below 25%.
Before you start
Identify your model (AirPods 1 to 5, AirPods Pro 1 to 3) and your case (Lightning, USB-C, wireless or MagSafe). The lights and the reset method change from one model to the next.
The charging settings need iOS or iPadOS 15 or later. Optimized Charge Limit on AirPods Pro 3 needs iOS or iPadOS 26 or later.
Warning: never puncture, bend or heat a lithium battery. A swollen battery won’t charge again and belongs in a collection point. Work on a non-flammable surface, and don’t open the case or the earbuds.
Warning: don’t insert anything into the charging port, whose contacts are metal. Use no sharp or abrasive object, pour no liquid into the ports and never rinse the AirPods under running water.
Warning: the reset in Solution 4 erases data. It removes the pairing and your custom settings, which you will have to set up again, so note them down first.
Warning: opening the AirPods or the case may void the warranty. Check your warranty end date before any repair and go through Apple.
Solution 1: case won’t charge, check the cable and the adapter
Start with wired charging. It is faster with an iPhone, iPad or Mac charger.
- Put the AirPods in the case and close the lid.
- Plug in the Lightning or USB-C cable that matches your case.
- Check that the cable is fully pushed into the case and into the adapter.
- Plug the adapter into an outlet that works.
- Let it charge for at least 15 minutes.
- If nothing changes, try another cable, then another USB power adapter.
The light should turn amber while charging, then green once the AirPods are charged. The case charges with or without the earbuds inside.
If another cable fixes it, here are two cables from well-known brands, one for a Lightning case and one for a USB-C case.
- Apple USB-C to Lightning cable, 1 mConnects a Lightning iPad or iPhone to a USB-C charger or computer. An Apple cable avoids charging faults caused by poor-quality cables.AmazonSee at Amazon
- Anker 310 USB-C to USB-C cable, 0.9 mUSB-C cable for charging and transferring data. A good cable avoids charging faults caused by a worn lead.AmazonSee at Amazon

Wireless charging with Qi or MagSafe
Your case supports wireless charging if you have AirPods Pro 1, 2 or 3, AirPods 3, AirPods 4 with active noise cancellation, AirPods 5 with the wireless case, or AirPods 1 and 2 with the wireless charging case.
- Close the lid of the case.
- Plug the wireless charger straight into an outlet.
- Place the case on the Qi or MagSafe charger, light facing up.
- If the light doesn’t come on, reposition the case.
- If wireless charging still fails, charge the case with a cable.
The light should come on for a few seconds, then go off. Charging continues.
Solution 2: left or right AirPod won’t charge, clean the port and the earbuds
A dirty earbud or a port clogged with debris can block charging. Apple describes how to clean the port and the shell. It doesn’t cover the metal contacts of the earbuds or the bottom of the case.
- Remove debris from the charging port with a soft, clean, dry brush.
- Wipe the case with a soft, dry, lint-free cloth.
- If needed, lightly dampen the cloth with isopropyl alcohol, then let it dry.
- If an earbud is soiled with soap or sunscreen, wipe it with a cloth lightly dampened with clean water.
- Dry it with a dry cloth.
- Wait at least 2 hours before putting it back in the case.
Good to know: unofficial sources mention a dry cotton swab for the earbud contacts. Apple doesn’t mention it. If you try it, keep it dry and don’t force anything.
Then push the earbuds firmly back into the case. When you open the lid, the light should show the charge of the AirPods.
Solution 3: AirPods Pro won’t charge to 100%, Optimized Battery Charging
A setting that is on by default can make it look as if the AirPods stop charging early. Check the real level first.
- Open the case or take the AirPods out.
- Open Settings, then tap Bluetooth.
- Tap the name of your AirPods, then tap the Info button next to them to see the charge level.
- To turn off optimized charging, open Settings > [AirPods name] > Battery.
- Turn off Optimized Battery Charging.
- On AirPods Pro 3, turn off Optimized Charge Limit in the same place, either for good or for one day.
The setting then no longer caps the charge. Optimized Battery Charging applies to all AirPods Pro and to AirPods 3 or later, on iOS or iPadOS 15 or later.
On a Mac, open the case near the computer. Then click Control Center in the menu bar, click Sound and choose your AirPods to see their level.
Good to know: a low-battery alert appears at 20%, 10% and 5%. A sound also plays at 10% and just before shutdown.
Solution 4: reset the AirPods
The method depends on the model. If the trouble is a connection that fails afterwards, see also our guide to AirPods that won’t connect.
This reset removes the pairing and your custom settings.
AirPods 1 to 3, AirPods Pro 1 and 2
- Put the AirPods in the case and close the lid.
- Wait 30 seconds.
- On the iPhone, open Settings > Bluetooth and tap the More Info button next to your AirPods.
- Tap Forget This Device, then tap again to confirm.
- Open the lid.
- Hold the setup button on the back of the case for about 15 seconds.
- Let go when the light flashes amber, then white.
- Follow the instructions on the iPhone screen to reconnect the AirPods.
AirPods 4, AirPods 5 and AirPods Pro 3
- Do steps 1 to 4 above: case closed for 30 seconds, then Forget This Device.
- Open the lid.
- When the light is on, double-tap the front of the case.
- When the light flashes white, double-tap a second time.
- When it flashes faster, double-tap a third time.
The light should flash amber, then white. No white? Close the lid for 20 seconds, reopen it and start the method for your model again.

Then set up your custom settings again.
If nothing works
Stop if another cable, another adapter, cleaning the port, 15 minutes of charging and the reset have changed nothing. The same goes if a single earbud or the case stays without a light. Don’t open the AirPods.
Contact Apple Support at getsupport.apple.com. Describe the problem to get the diagnostic, repair or replacement options for an earbud or the case. Have the exact model and the purchase date at hand.
Apple will give you the out-of-warranty repair price. Figures published in the press date from 2016 to 2022 and have not been checked on Apple’s website. According to those same articles, the battery is replaced free of charge under AppleCare+ if its capacity drops below 80%.
Sound only coming out of one side? See what to do when only one AirPod works.
Take better care of your AirPods: our toolbox
A good cable, a reliable adapter and a suitable wireless charger prevent most charging faults.
- Apple USB-C to Lightning cable, 1 mConnects a Lightning iPad or iPhone to a USB-C charger or computer. An Apple cable avoids charging faults caused by poor-quality cables.AmazonSee at Amazon
- Anker 310 USB-C to USB-C cable, 0.9 mUSB-C cable for charging and transferring data. A good cable avoids charging faults caused by a worn lead.AmazonSee at Amazon
- Anker Nano 20 W USB-C wall charger (PowerPort III)Compact USB-C charger that powers most phones at full speed. A reliable charger rules out a faulty power source.AmazonSee at Amazon
- Anker PowerWave Pad 10 W Qi wireless chargerA flat Qi pad: set the phone on it and it charges without a cable. It spares the charging port from daily plugging.AmazonSee at Amazon
Frequently asked questions
Why are my AirPods not charging in the case?
The case may be empty, or the earbuds may not touch their contacts properly. Charge the case with a cable for at least 15 minutes first, then check that each earbud is pushed in firmly and clean. On compatible models, optimized charging can also cap the charge.
What does the flashing amber light on the AirPods case mean?
On up-to-date AirPods 4, 5, Pro 2 and Pro 3, a slow amber flash means the AirPods or the case are below 95%. A fast flash means the AirPods are below 95% and the case is below 25%.
During a reset, amber followed by white is normal. Outside that case, the “error” meaning of a flashing amber light comes only from forums, not from Apple.
How do I clean the charging contacts on AirPods?
For the case, Apple recommends a soft, clean, dry brush in the charging port, then a soft lint-free cloth. For the earbuds: a cloth lightly dampened with clean water, a dry cloth, then 2 hours of drying before they go back in the case. Insert nothing metal or sharp, and put no liquid in the ports.
How much does it cost to replace an AirPods case or battery?
Apple will give you the out-of-warranty price when you request support. Figures published in the press date from 2016 to 2022 and have not been checked on Apple’s website. According to those same articles, the battery is replaced free of charge under AppleCare+ if its capacity drops below 80%.
Share this content:
