This article contains affiliate links: if you buy through them, Wanda-techs earns a commission at no extra cost to you.
To start a smart home without a big budget, begin with a Wi-Fi smart plug: the Tapo P110 if you use Alexa or Google Assistant, or the Tapo P110M if you also want Siri and Apple Home through Matter. Then add a Philips Hue White Ambiance bulb, which works over Bluetooth with no bridge, or a Tapo T110 open/close sensor, which requires the Tapo H100 hub. All four product pages were checked on the manufacturers’ sites in November 2026.
Our picks at a glance
- Tapo P110M: our pick for a first purchase, a Matter-certified plug that works with Alexa, Siri, Google Assistant and Apple Home, with a bill estimate.
- Tapo P110: for a home that already runs Alexa or Google Assistant, a hub-free Wi-Fi plug that tracks energy use, with no Matter on its product page.
- Philips Hue White Ambiance E27: for tunable white light from warm to cool, over Bluetooth with no bridge, though the Hue bridge is still required for voice assistants.
- Tapo T110 with the Tapo H100 hub: for an alert when a door or window opens, as long as you also buy the hub.
Meross Matter plugs and the Echo Dot (2026) are not part of this selection. We found no official Meross spec sheet and no official page confirming that the Echo Dot (2026) is on sale in France, where the French version of this guide was researched.

Before you start
The Tapo P110 and P110M connect over 2.4 GHz Wi-Fi only, so check that your router broadcasts that band. They work without a hub. Tapo sensors go through the Tapo H100 hub, and the Hue bulb is controlled on its own over Bluetooth or through the Hue bridge.
Warning: unplug the device from the mains before opening it, and never work on a device that is plugged in. The capacitors in some appliances (TVs, microwaves, power supplies) stay charged after unplugging, so do not touch them.
Warning: a smart plug has a maximum load. In its FAQ, Tapo states 10 A, which is 2,300 W at 230 V, for resistive loads, and advises staying under 80% of that maximum, about 1,840 W, for continuous use. Do not plug in an air conditioner, a refrigerator, a washing machine, an electric car charger, or any device that must stay powered without interruption.
These ratings are for the EU plugs sold in France and Europe, at 230 V. We have not converted them for other plug types or voltages: if you live outside the EU, check the rating on your own plug and on the manufacturer’s page for your country.
TP-Link’s French product pages list 16 A and 3,680 W for the P110 and the P110M, while the FAQ uses the P100 as its example and asks you to check your model. We go with the stricter limit. Read the label on your plug, and do not connect a heater before you have checked it.
Good to know: a power strip behind a smart plug is only acceptable if the total load stays under the plug’s maximum. Tapo also asks you to keep the plug out of sunlight, heat and enclosed spaces.
Warning: opening a device may void its warranty, so check the warranty end date first. Using a plug beyond its stated load also falls outside the manufacturer’s instructions.
How to choose a smart plug and its accessories
Connection: Wi-Fi, Bluetooth or Zigbee
A Wi-Fi plug connects straight to your router, with no box in between: that is the case for the Tapo P110 and P110M. The Hue White Ambiance bulb accepts Bluetooth directly, and Zigbee too.
Matter and your voice assistant: Alexa, Google or Apple
The Tapo P110M is Matter-certified and works with Alexa, Siri, Google Assistant and Apple Home. The Tapo P110 works with Alexa and Google Assistant, and its product page does not mention Matter.
The plug’s maximum power
Compare the wattage printed on the device you want to plug in with the plug’s limit, and keep some margin for continuous use. The Tapo FAQ excludes motors and compressors above 1/10 horsepower, such as those in a refrigerator or a washing machine.
Energy monitoring
The Tapo P110 tracks the energy use of the device plugged into it. The P110M goes further: you enter your electricity rate and the plug estimates your bill.
The hub, to count in the budget
A Tapo T110 sensor does not work without the Tapo H100 hub. For the Hue bulb, the bridge is optional, but it becomes necessary for voice control.
Tapo P110M: our pick for starting with Matter
The P110M is Matter-certified and takes voice commands from Alexa, Siri or Google Assistant; TP-Link also lists it as compatible with Apple Home. It measures energy use, estimates your bill from your electricity rate, and offers schedules, an auto-off timer and an away mode. Bluetooth is used only for setup, and the connection then runs over 2.4 GHz Wi-Fi.
Its limits: no 5 GHz Wi-Fi, and a 72 × 51 × 40 mm housing that you should compare with the space around your wall outlet. The maximum load on the French product page differs from the Tapo FAQ, hence the cautious rule in the previous section. It is sold singly or in a pack of two.
For a first Matter-certified plug, here is the P110M.

Tapo P110M Matter Wi-Fi smart plug with energy monitoring
Controls an appliance from your phone or by voice and tracks its energy use. Matter-certified, it works with Alexa, Google Assistant and Apple Home.
- AmazonSee at Amazon
Tapo P110: for an Alexa or Google Assistant home
The P110 is a Wi-Fi plug that tracks energy use, needs no hub, and works with Alexa and Google Assistant. TP-Link lists a voltage of 220 to 240 V and 2.4 GHz Wi-Fi only. Its own consumption is low: 0.64 W on standby and 1.64 W with the relay closed.
Its limits: Matter does not appear on its product page, so nothing guarantees that it works with Siri or Apple Home.
Tip: if you have an iPhone or may switch assistants, go for the P110M instead.
If your router offers 2.4 GHz Wi-Fi and you have no iPhone, the P110 is enough.

Tapo P110 mini Wi-Fi smart plug with energy monitoring
Switches an appliance on and off remotely, with schedules and energy tracking. It runs on Wi-Fi without a hub and works with Alexa and Google Assistant.
- AmazonSee at Amazon
Philips Hue White Ambiance E27: for tunable light without a bridge
This E27-base bulb adjusts its white from 2,200 to 6,500 K, from warm white to cool white. Philips lists up to 806 lm at 4,000 K for 9 W, a color rendering index of 80 or more and a 2-year warranty. You control it over Bluetooth from your phone, with no Wi-Fi and no bridge, and it also accepts Zigbee.
Its limits: voice control requires the Hue bridge. Philips lists other features with the bridge, but its product page could not be found and we could not verify which ones. The bulb is rated F on the energy label and uses 0.5 W on standby.

To try tunable lighting without a bridge, here is the Hue White Ambiance E27 bulb.

Philips Hue White Ambiance E27 Bluetooth smart bulb (4-pack)
Tunes white light from warm to cool from your phone over Bluetooth, no bridge needed. A Hue Bridge adds voice control and more features.
- AmazonSee at Amazon
Tapo T110 and H100 hub: for watching a door or window
The T110 is an open/close sensor that sends a real-time alert when a door or window opens or closes. It attaches with adhesive. Without the Tapo H100 hub, it does not work.
Its limits: the hub is a second purchase to plan for, and Tapo notes that some features may require an update or a subscription. Matter is not mentioned on its product page.
To watch a door, you need the sensor and the hub, shown here side by side.
- Tapo T110 smart door and window contact sensorSends an alert to your phone when a door or window opens. It works with a Tapo hub, sold separately.AmazonSee at Amazon
- Tapo H100 smart hub for Tapo sensors and switchesConnects Tapo sensors to your network and triggers alarms and chimes. It plugs into the mains and handles up to 64 devices.AmazonSee at Amazon
Comparison table
| Model | Type | Connection | Hub or bridge | Assistants | Best for |
|---|---|---|---|---|---|
| Tapo P110M | plug | 2.4 GHz Wi-Fi, Matter | none | Alexa, Siri, Google Assistant, Apple Home | first purchase, Apple or mixed home |
| Tapo P110 | plug | 2.4 GHz Wi-Fi | none | Alexa, Google Assistant | Alexa or Google home |
| Philips Hue White Ambiance E27 | bulb | Bluetooth, Zigbee | Hue bridge optional, required for voice | with the bridge | tunable lighting |
| Tapo T110 | open/close sensor | via the hub | Tapo H100 hub required | not stated | open/close alert |
To compare the four picks side by side:
- Tapo P110M Matter Wi-Fi smart plug with energy monitoringControls an appliance from your phone or by voice and tracks its energy use. Matter-certified, it works with Alexa, Google Assistant and Apple Home.AmazonSee at Amazon
- Tapo P110 mini Wi-Fi smart plug with energy monitoringSwitches an appliance on and off remotely, with schedules and energy tracking. It runs on Wi-Fi without a hub and works with Alexa and Google Assistant.AmazonSee at Amazon
- Philips Hue White Ambiance E27 Bluetooth smart bulb (4-pack)Tunes white light from warm to cool from your phone over Bluetooth, no bridge needed. A Hue Bridge adds voice control and more features.AmazonSee at Amazon
- Tapo T110 smart door and window contact sensorSends an alert to your phone when a door or window opens. It works with a Tapo hub, sold separately.AmazonSee at Amazon
Buying at the right time
Black Friday falls on Friday, November 27, 2026, and Cyber Monday on Monday, November 30, 2026. Amazon runs its own event on its own dates in each country, so check the deals page of your local store. To spot other offers this season, see our selection of the real tech deals of Black Friday 2026 and our Amazon Black Friday 2026 guide.
Before you confirm a deal:
- Note the exact model name: the P110 and the P110M do not work with the same assistants.
- Check how many plugs the pack contains, since the P110M is sold singly or as a pair.
- For the Tapo T110 sensor, check that the offer includes the Tapo H100 hub, or that you already own one.
- Compare the crossed-out price with the lowest price the seller charged during the 30 days before the discount.
- Keep your order confirmation: for a distance purchase in the EU, you have at least 14 days after delivery to withdraw.
In the European Union, a discount announcement must show as the previous price the lowest price the seller applied in the 30 days before the reduction. Other countries have their own rules, so check the ones that apply where you live.
To expose an inflated crossed-out price, follow our method for spotting a fake Black Friday deal. The 14-day withdrawal right has exceptions, for example for personalized goods.
Take better care of your smart home: our toolbox
A few accessories to round out your setup once the first devices are in place.
- Tapo H100 smart hub for Tapo sensors and switchesConnects Tapo sensors to your network and triggers alarms and chimes. It plugs into the mains and handles up to 64 devices.AmazonSee at Amazon
- Tapo P300 Wi-Fi smart power strip, 3 sockets and 3 USB portsControls each of its three sockets separately from your phone, with schedules. Three USB ports also charge small devices.AmazonSee at Amazon
- Tapo T310 smart temperature and humidity sensorMeasures a room's temperature and humidity and shows them in the app. It works with a Tapo hub, sold separately.AmazonSee at Amazon
- Tapo T110 smart door and window contact sensorSends an alert to your phone when a door or window opens. It works with a Tapo hub, sold separately.AmazonSee at Amazon
Frequently asked questions
Where should I start with a smart home?
Start with a Wi-Fi smart plug, which needs no hub. Take the Tapo P110M if you use Siri or Apple Home, or if you are torn between several assistants, since it is Matter-certified. Then add a bulb or a sensor depending on your needs, and count the Tapo H100 hub if you choose a Tapo T110 sensor.
Do I need a hub for a smart plug?
No, not for the Tapo P110 and P110M, which connect directly over 2.4 GHz Wi-Fi. A hub becomes necessary for other products: the Tapo T110 sensor works with the Tapo H100 hub. The Hue White Ambiance bulb works without a bridge over Bluetooth, but the Hue bridge is required for voice control.
What is Matter?
Matter is a smart home standard shared by several ecosystems, so that one device can be controlled from several assistants. The Tapo P110M is Matter-certified and works with Alexa, Siri, Google Assistant and Apple Home. The Tapo P110 product page does not mention Matter.
Does a smart plug use electricity?
Yes, the plug itself uses a little. TP-Link lists 0.64 W on standby and 1.64 W with the relay closed for the Tapo P110. For comparison, the Hue White Ambiance bulb uses 0.5 W on standby.
Photo credits: Wemo Mini Smart Plug (3750) by Gregory Varnum, licence CC BY-SA 4.0; Power plugs by kewl, licence CC BY 2.0; LED filament light bulb E27, 6W, 810lm, 2700K, EGB 539575-8434 by Raimond Spekking, licence CC BY-SA 4.0
Share this content:
