Advertisement
Components and peripherals

Wireless Mouse Not Working? How Do You Fix It in 5 Steps?

Dead battery, misplaced USB receiver or lost Bluetooth pairing: here is how to get a wireless mouse that stopped working going again. Five fixes for Windows and macOS, from the simplest to the most involved.

5 min read

Wireless mouse next to a USB receiver, Bluetooth symbol and arrow showing it working again
Table of contents
  1. Common symptoms and causes
  2. Before you start
  3. Solution 1: check the switch, replace the battery or recharge the mouse
  4. Solution 2: replug the wireless mouse receiver and move interference away
  5. Solution 3: remove and pair a Bluetooth mouse that stopped working again
  6. Solution 4: re-pair a Logitech mouse with the manufacturer’s software
  7. Solution 5: test on another computer
  8. If nothing works
  9. Take better care of your wireless mouse: our toolbox
  10. Frequently asked questions
    1. Why did my wireless mouse suddenly stop working?
    2. How do I reconnect a wireless mouse to its USB receiver?
    3. How can I tell if my mouse battery is dead?
    4. How do I fix a Bluetooth mouse that stopped responding on Windows 11?

This article contains affiliate links: if you buy through them, Wanda-techs earns a commission at no extra cost to you.

Your wireless mouse is not working: the pointer freezes, jumps or only half responds. Logitech lists a weak battery first, then a USB receiver that was moved, plugged into a hub or hit by radio interference. Set aside about fifteen minutes to go through the solutions below, from the simplest to the most involved.

Advertisement

Common symptoms and causes

  • Weak, dying or dead battery.
  • Mouse power switch left on OFF.
  • USB receiver unplugged, moved to another port or another computer, or plugged into a USB hub or a KVM switch (a box that shares one keyboard and mouse between several PCs).
  • Mouse sitting on a metal surface.
  • Radio interference: wireless speakers, power supplies, monitors, phones, garage door openers.
  • Bluetooth pairing lost, or the mouse is still paired with another computer in range.
  • Faulty receiver or driver.

Before you start

First work out how the mouse connects. A mouse that came with a small USB receiver uses it.

The next points were not checked against the Logitech page we consulted. A mouse with no receiver would use Bluetooth, and a Unifying receiver would carry the Unifying logo; otherwise it would be a Bolt receiver or a standard USB receiver.

Good to know: Logitech Bolt and Unifying receivers are not compatible with each other. A Bolt mouse will not pair with a Unifying receiver, and the other way around.

Warning: never puncture, bend or heat a lithium battery; a swollen battery will not recharge and must go to a collection point; work on a non-flammable surface. Recharge a rechargeable mouse with its original USB cable and never force a swollen battery. Replace dead alkaline batteries with batteries of the same type.

Solution 1: check the switch, replace the battery or recharge the mouse

This is the first check for both Logitech and Microsoft. The power light, often on top, tells you whether the mouse is getting power.

  1. Turn the mouse over and open the battery compartment.
  2. Check that the batteries are seated properly, the right way round.
  3. Replace them with fresh batteries if the mouse still does not respond.
  4. Set the switch on the underside of the mouse to ON.
  5. For a rechargeable mouse, plug it in with its original USB cable and let it charge.

The power light turns green, as on the Logitech M317 or M235. The pointer moves again.

Advertisement

If the batteries are worn out, here are two AA options to compare: disposable alkaline batteries or rechargeable ones.

  • Duracell Plus AA (LR6) alkaline batteries, pack of 24AA alkaline batteries, the size used by many wireless mice and keyboards. A pack of 24 lets you swap worn batteries for a long time to come.AmazonSee at Amazon
  • Panasonic eneloop AA, 4 rechargeable Ni-MH batteriesRechargeable AA batteries that come already charged and can be reused hundreds of times. They save you from buying disposable batteries for a wireless mouse.AmazonSee at Amazon
souris-sans-fil-ne-fonctionne-plus-1-1024x576 Wireless Mouse Not Working? How Do You Fix It in 5 Steps?
Fresh battery and switch on ON: the power light should turn green.

Solution 2: replug the wireless mouse receiver and move interference away

The receiver plugs straight into the computer, in a USB port that works. No USB hub and no KVM switch: Logitech advises against them.

  1. Unplug the receiver from any USB hub or KVM.
  2. Plug it in firmly to a USB port on the computer itself.
  3. Try another USB port if the mouse does not respond.
  4. Move other electrical devices at least 20 cm (8 in) away from the receiver.
  5. Bring the mouse closer to the receiver.
  6. On Windows, open Device Manager and check that the receiver appears in the list.
  7. If the mouse works on another port, update the motherboard’s USB chipset driver.

The pointer now responds without dropping out.

Tip: put the mouse on a mouse pad or any non-metal surface. Logitech lists metal among the causes of lost connection.

If the receiver is hidden behind the tower, this USB extension cable brings it back onto the desk, next to the mouse.

souris-sans-fil-ne-fonctionne-plus-300x169 Wireless Mouse Not Working? How Do You Fix It in 5 Steps?

UGREEN USB 3.0 extension cable, male to female, 1 m

An extension that brings a USB port up onto the desk. It lets you move a wireless mouse receiver closer, away from the back of the computer.

Solution 3: remove and pair a Bluetooth mouse that stopped working again

Pairing means linking the mouse to the computer. When that link is lost, you have to redo it.

Advertisement
  1. Remove the mouse from the computer’s list of Bluetooth devices.
  2. Turn on airplane mode for 10 to 15 seconds, then turn it off.
  3. Switch off other Bluetooth devices nearby.
  4. Put the mouse in pairing mode: on a Microsoft mouse, hold the pairing button, usually on the underside, for 5 to 7 seconds, until the light blinks.
  5. On Windows, open Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth.
  6. Select your mouse in the list and follow the on-screen instructions.

The mouse shows as connected and the pointer responds.

Good to know: if the light blinks three times and then goes out, the mouse is still paired with another computer in range. Remove it from that computer first, then try again.

On a Mac, the steps below were not checked against Apple’s support page. Labels may vary with the version.

  1. On macOS 13 or later, open Apple menu > System Settings > Bluetooth.
  2. Control-click the mouse, then choose Forget. On macOS 12.5 or earlier, go to System Preferences > Bluetooth and click Remove.
  3. Put the mouse in pairing mode, then click Connect next to its name.

Good to know: a Bluetooth mouse goes to sleep after 8 to 10 minutes of inactivity. A short delay when it wakes is normal. It is not a fault.

Solution 4: re-pair a Logitech mouse with the manufacturer’s software

A Logitech mouse can lose its link with its receiver; the manufacturer’s app pairs them again. Unifying Software, SetPoint and Connection Utility are no longer supported: Logitech recommends Logi Options+.

  1. Install the Logi Bolt app or Logi Options+ on the computer.
  2. Click ADD DEVICE.
  3. Choose Logi USB receiver or Logi Unifying receiver, depending on your receiver.
  4. Follow the pairing instructions shown on screen.

The mouse appears in the app and the pointer responds.

souris-sans-fil-ne-fonctionne-plus-2-1024x576 Wireless Mouse Not Working? How Do You Fix It in 5 Steps?
Logi Bolt or Logi Options+ pairs the mouse with its Logitech receiver again.

Using an HP, Dell or Microsoft mouse? The receiver’s pairing tool is on the brand’s support page.

Solution 5: test on another computer

This test points to the part at fault: the mouse, the receiver or the computer.

  1. Plug the receiver into another computer.
  2. For a Bluetooth mouse, pair it with another computer.
  3. On a Windows computer, check in Device Manager that the receiver is recognized.

Still not recognized? Logitech then names the receiver as the most likely cause, rather than the mouse. If everything works on the other computer, go back to solutions 2 and 3 on yours.

If nothing works

If the mouse does not work on any computer, it needs replacing. If only the receiver goes unrecognized everywhere, replace it with a receiver of the same type (Bolt or Unifying for Logitech), or change mouse if no spare receiver exists for your model.

If the mouse has to be replaced, here are three wireless models at different prices to compare.

  • Logitech M185 wireless mouse, 2.4 GHz with mini USB receiverA simple wireless mouse with a small USB receiver that stays plugged into the computer. One AA battery keeps it running for months.AmazonSee at Amazon
  • Logitech Pebble M350 silent Bluetooth wireless mouseA slim, quiet mouse that connects by Bluetooth or with a USB receiver. One AA battery powers it for a long time.AmazonSee at Amazon
  • Logitech MX Anywhere 3S compact wireless mouse, Bluetooth, rechargeableA compact mouse that connects by Bluetooth or with a USB receiver and charges over a USB-C cable. Its silent clicks make it pleasant to use on the go.AmazonSee at Amazon

Before you buy another, read our comparison of wired and wireless mice. If your laptop’s keyboard is acting up too, see what to do when a laptop keyboard stops working. And a wireless mouse also connects to a phone: here is how to connect a keyboard and mouse to a smartphone.

Take better care of your wireless mouse: our toolbox

A few accessories to prevent the next breakdown and keep a wireless mouse reliable.

  • Panasonic eneloop AA, 4 rechargeable Ni-MH batteriesRechargeable AA batteries that come already charged and can be reused hundreds of times. They save you from buying disposable batteries for a wireless mouse.AmazonSee at Amazon
  • Duracell Plus AA (LR6) alkaline batteries, pack of 24AA alkaline batteries, the size used by many wireless mice and keyboards. A pack of 24 lets you swap worn batteries for a long time to come.AmazonSee at Amazon
  • UGREEN USB 3.0 extension cable, male to female, 1 mAn extension that brings a USB port up onto the desk. It lets you move a wireless mouse receiver closer, away from the back of the computer.AmazonSee at Amazon
  • TP-Link UB500 Plus, Bluetooth 5.3 USB adapter with external antennaAdds Bluetooth to a computer that has none, or improves a weak built-in one. The external antenna helps the connection with a mouse or headphones.AmazonSee at Amazon
  • Duracell Plus AAA (LR03) alkaline batteries, pack of 241.5 V alkaline AAA batteries for remote controls, thermostats and other low-drain devices. The large pack covers several changes.AmazonSee at Amazon

Frequently asked questions

Why did my wireless mouse suddenly stop working?

Logitech lists a weak battery first, then a receiver moved to another port or computer, a USB hub or a KVM, a metal surface and radio interference. Check the switch and the batteries, then plug the receiver straight into the computer.

How do I reconnect a wireless mouse to its USB receiver?

With Logitech, install the Logi Bolt app or Logi Options+, click ADD DEVICE and choose your receiver type. Then follow the on-screen instructions. A Bolt receiver will not accept a Unifying mouse, and the other way around.

How can I tell if my mouse battery is dead?

Look at the power light: if it is off, set the switch on the underside of the mouse to ON, and the light should turn green. If not, check that the batteries are seated properly, the right way round. If the mouse still does not respond, replace them with fresh batteries.

How do I fix a Bluetooth mouse that stopped responding on Windows 11?

Remove the mouse from the list of Bluetooth devices, then pair it again from Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth. Turn on airplane mode for 10 to 15 seconds beforehand, and switch off other Bluetooth devices nearby. If the mouse light blinks three times and then goes out, it is still paired with another computer.

Share this content:

Leave a Reply

Your email address will not be published. Required fields are marked *