The JBL Wave 200TWS are high-quality wireless headphones that offer crystal-clear sound and excellent battery life. However, even the best products can run into problems from time to time. Here’s a list of common problems you might encounter with the JBL Wave 200TWS, along with their solutions.

Solutions to common JBL Wave 200TWS problems

What to do if the JBL Wave 200TWS is not working

If your JBL Wave 200TWS are not working properly, here are some steps you can take to try and fix them:

  • Make sure the earphones are properly inserted into their charging case and that the case is charged.
  • Make sure the headphones are properly paired with your Bluetooth device. If necessary, follow the instructions in the user manual to reset and re-pair them.
  • Check that the audio settings on your device are correct and that the volume is set high enough.
  • If the headphones are still not working, try cleaning them gently with a soft cloth to remove any dust or dirt that may be clogging the speaker grilles.

JBL Wave 200TWS won’t connect


If you’re having trouble connecting the headphones to your Bluetooth device, make sure the headphones and your device are close enough together. You should also make sure the headphones are charged and paired properly. To pair the headphones, press and hold the Multi-Function Button for about 5 seconds until the LEDs flash alternately, then press the Bluetooth pairing button on your device.

Headphones are not charging properly

If the headphones do not charge, check that the charging connectors are clean and not obstructed by dust or dirt. Also, make sure the charging box is sufficiently charged and that the earphones are properly inserted into their charging slot.

JBL Wave 200TWS earphones do not turn on


If the earphones don’t turn on, make sure they are sufficiently charged. You can also try resetting the headphones by holding down both Multi-Function Buttons for about 5 seconds until the LEDs flash alternately.

JBL Wave 200TWS poor sound quality problem

If the sound quality is not up to your expectations, make sure the headphones are paired correctly and that they are far enough away from any obstacles, such as a wall or metal object. You can also try adjusting the audio settings on your device to improve the sound quality.

Headphones do not turn off


If the earphones do not turn off even after holding down the Multi-Function Button for 3 seconds, try resetting them by holding down both Multi-Function Buttons for about 5 seconds until the LEDs flash alternately.

By following these simple troubleshooting steps, you should be able to solve most problems you may encounter with your JBL Wave 200TWS. If you still have problems, you can always contact JBL customer service for help.


Also check out:

Leave a Reply

Your email address will not be published. Required fields are marked *

4 × 4 =