Advertisement
Galaxy Watch

How do you enable ECG and blood pressure on a Galaxy Watch?

The Galaxy Watch ECG and blood pressure features run on Samsung Health Monitor with a Samsung Galaxy phone. Here is the official procedure, from installation to cuff calibration.

Updated 5 min read

Smartwatch and smartphone showing a health measurement graph from the wrist
Table of contents
  1. Common symptoms and causes
  2. Before you start
  3. Step 1: install Samsung Health Monitor and create your profile
  4. Step 2: record an ECG with your Galaxy Watch
  5. Step 3: calibrate blood pressure with a cuff monitor
  6. Step 4: measure blood pressure and read the results
  7. If nothing works
  8. Take better care of your Galaxy Watch: our toolbox
  9. Frequently asked questions
    1. How do I enable ECG on a Galaxy Watch?
    2. How do I measure blood pressure with a Samsung watch?
    3. Why isn’t Samsung Health Monitor available on my phone?
    4. Is the Galaxy Watch blood pressure reading accurate?
    5. How often do you need to calibrate blood pressure on a Galaxy Watch?

Updated on November 18, 2026

This article contains affiliate links: if you buy through them, Wanda-techs earns a commission at no extra cost to you.

Advertisement

Recording an ECG on a Galaxy Watch (an electrocardiogram, a trace of the heart’s electrical activity) and measuring blood pressure both go through the Samsung Health Monitor app, installed on the watch and on a Samsung Galaxy phone. Neither works with a phone from another brand, and both may be missing in some countries. Blood pressure also needs a cuff-based monitor: the watch is calibrated against it, and the calibration has to be redone every 28 days.

Common symptoms and causes

  • Samsung Health Monitor is not offered: the phone is not a Samsung Galaxy, or the feature is not available in your country.
  • The ECG stops partway: dry skin, body hair, movement, talking during the recording, or pressing the Home button.
  • Blood pressure measurement is blocked: according to Samsung information we could not read in full, the calibration is more than 28 days old.

If you wear an Apple Watch instead, see our guide on Apple Watch ECG not working.

Before you start

Check these conditions, set by Samsung:

  • Watch: Galaxy Watch Active2, Galaxy Watch3 or a later model (Watch4 and newer included), paired with the phone, with the watch software and Samsung Health Monitor up to date.
  • Phone: a Samsung Galaxy running Android 9.0 or later. Phones from other brands are not supported.
  • Samsung account: you need to be signed in with it for blood pressure.
  • Country: the ECG may not be available in some countries, and blood pressure availability varies by country or region. The Samsung pages we read give no list.
  • Cuff-based blood pressure monitor: required to calibrate the watch.
  • Age and health: the ECG is not intended for people under 22 or for anyone with a known arrhythmia other than atrial fibrillation.

Warning: the Galaxy Watch is not a medical device. Samsung describes these readings as a general wellness and preventive tool: they are not meant to diagnose, treat or prevent any condition, and they do not replace advice from a health professional. Never change a treatment because of a reading from the watch.

Warning: do not install a modified copy of Samsung Health Monitor from outside Samsung’s own channels to get around country or phone restrictions. This is a regulated health feature, and a modified copy is not official.

Good to know: menus and screens vary with the software version, country and region, so a label on your watch may differ slightly from the ones quoted here.

Advertisement

Step 1: install Samsung Health Monitor and create your profile

  1. Update the watch software and check that the watch is paired with the phone.
  2. Install Samsung Health Monitor on the phone.
  3. Sign in with your Samsung account.
  4. On the watch, open Samsung Health Monitor and tap ECG.
  5. Tap the install button the watch offers (the exact wording depends on the version).
  6. On the phone, accept the terms of use when prompted.
  7. Allow the permissions the app asks for and confirm.
  8. Create your profile.

Samsung Health Monitor is now ready on both devices.

Good to know: the Samsung pages we read do not name the store to install from. Follow the install button shown on the watch or phone, and do not look for the file anywhere else.

Step 2: record an ECG with your Galaxy Watch

Prepare first: dry skin or body hair can interrupt the recording.

  1. Clean your hand, your wrist and the watch.
  2. Moisturise the skin if it is dry, or remove body hair if it gets in the way.
  3. Wear the watch snugly, slightly away from your wrist bone and towards your elbow.
  4. On the watch, open Samsung Health Monitor and tap ECG.
  5. Review the information and allow the permissions it asks for.
  6. Tap Open phone app.
  7. Wake the phone with your PIN, fingerprint or face and follow the instructions in the Samsung Health app.
  8. Rest your forearms on a table or other flat surface, keep still and do not speak.
  9. Lightly rest a fingertip of your opposite hand on the watch’s Home button for 30 seconds, while the countdown runs.
  10. When the recording ends, swipe up and down on the watch to read the result.
  11. To log a symptom, swipe to the bottom of the results, tap Add, select your symptoms from the list and tap Save.
  12. To share the report from your phone, open Samsung Health Monitor > More options > Share.

The result appears on the watch, and the report is saved as a PDF in Samsung Health Monitor. If you need to change the symptoms you chose, tap Edit.

refresh-177214-1-1024x576 How do you enable ECG and blood pressure on a Galaxy Watch?
The ECG result appears on the watch and the PDF report arrives in Samsung Health Monitor.

Warning: rest your finger on the button, do not press it. Pressing the Home button during the recording stops the test.

Step 3: calibrate blood pressure with a cuff monitor

Calibration sets the watch against the readings of a cuff-based monitor. Keep it within reach.

Advertisement
  1. On the watch, swipe left from the home screen to the Blood Pressure widget.
  2. Tap Learn More, then Open phone app.
  3. Follow the instructions on the phone to calibrate the watch.
  4. Put the cuff on the arm opposite the watch and keep the watch snug.
  5. Enter the readings the cuff monitor shows in the app.
  6. Repeat until you have three consecutive readings.

A final screen then confirms the watch is ready (its wording comes from Samsung’s Italian page and may differ in English).

If you do not own a cuff monitor yet, here is an upper-arm model with a 22 to 42 cm cuff.

refresh-177214-300x169 How do you enable ECG and blood pressure on a Galaxy Watch?

Omron M3 Comfort (HEM-7155-E) automatic upper-arm blood pressure monitor

Measures blood pressure at the upper arm with a 22 to 42 cm cuff. It provides the reference readings a compatible smartwatch is calibrated against.

Good to know: according to summaries of Samsung’s instructions that we could not read in full, the three readings are taken within 30 minutes and the calibration is valid only for the person who did it. The same summaries advise avoiding alcohol, caffeine, smoking, exercise and bathing in the 30 minutes beforehand.

Step 4: measure blood pressure and read the results

Once calibrated, the watch is enough: you do not need the cuff again until the next calibration.

  1. Sit down and stay calm.
  2. Swipe left to the Blood Pressure widget and tap Measure.
  3. Read the instructions, then tap OK.
  4. Stay seated and do not talk while the watch measures.
  5. Tap Done.

The blood pressure value appears on the watch. Samsung says to recalibrate every 28 days.

refresh-177214-2-1024x576 How do you enable ECG and blood pressure on a Galaxy Watch?
Blood pressure measurement needs a new cuff calibration every 28 days.

Tip: according to Samsung information we could not read in full, a notification warns you 3 days before the deadline, and you can recalibrate earlier from the menu of your blood pressure history, using its recalibrate option.

If nothing works

  • Samsung Health Monitor is not offered for your phone or country: there is no official workaround. Measure your blood pressure with a cuff monitor and talk to a health professional.
  • Your phone seems too old: the Samsung pages we read ask for Android 9.0 or later. A search summary, not confirmed by those pages, mentions Android 12 and Wear OS 4.0 for recent watches, so update the phone.
  • Blood pressure measurement no longer starts: repeat the calibration in step 3, especially if the last one is 28 days old or more (Samsung asks for a calibration every 28 days).
  • The ECG keeps failing despite the tips in step 2: read our guide on ECG not working on a Galaxy Watch.

If the problem persists, read Samsung’s help page on heart rate, ECG and blood pressure and contact Samsung support. Have the watch model, the phone model and the software and Samsung Health Monitor versions to hand.

Take better care of your Galaxy Watch: our toolbox

Two upper-arm blood pressure monitors for calibration and follow-up, and an original wall charger to power the watch cable.

  • Withings BPM Connect connected upper-arm blood pressure monitorMeasures blood pressure at the upper arm and sends the readings to the Withings app over Wi-Fi or Bluetooth. The cuff fits arms of 22 to 42 cm.AmazonSee at Amazon
  • Omron M3 Comfort (HEM-7155-E) automatic upper-arm blood pressure monitorMeasures blood pressure at the upper arm with a 22 to 42 cm cuff. It provides the reference readings a compatible smartwatch is calibrated against.AmazonSee at Amazon
  • Samsung 25 W USB-C wall charger (EP-TA800)A USB-C wall charger that powers a phone or a charging cable. Useful as a spare for the cable of a smartwatch.AmazonSee at Amazon

Frequently asked questions

How do I enable ECG on a Galaxy Watch?

Install Samsung Health Monitor on your Samsung Galaxy phone, sign in with your Samsung account, then tap ECG in the watch app. Accept the terms, allow the permissions and create your profile. You need a Galaxy Watch Active2, Watch3 or later, and the feature may not be available in some countries.

How do I measure blood pressure with a Samsung watch?

Calibrate the watch first with a cuff-based monitor, entering three consecutive readings in Samsung Health Monitor. Then open the Blood Pressure widget, tap Measure, stay seated without talking and tap Done. The cuff is not needed again until the next calibration.

Why isn’t Samsung Health Monitor available on my phone?

The app requires a Samsung Galaxy phone running Android 9.0 or later, and phones from other brands are not supported. Availability also depends on your country or region. A modified copy of the app is not a fix, because this is a regulated health feature.

Is the Galaxy Watch blood pressure reading accurate?

The Samsung pages we read give no accuracy figure. Samsung presents the measurement as a general wellness and preventive tool, not a way to diagnose or treat anything. For medical follow-up, rely on a cuff monitor and the advice of a health professional.

How often do you need to calibrate blood pressure on a Galaxy Watch?

Every 28 days, according to Samsung. Samsung’s Italian page says 4 weeks, which is the same period. Take the three cuff readings again each time.

Share this content:

Leave a Reply

Your email address will not be published. Required fields are marked *